mirror of
https://github.com/ThearchyHelios/AgentLab.git
synced 2026-11-15 00:51:59 +00:00
ThearchyHelios
fcdcc30d4e
一、可点击证据第二期
取数链路
- 智能体、工具节点、代码节点、知识检索取数时都记进证据台账；报告目录按台账编出 Q1… / K1…
- 报告可以引用快照里的一格（[[v:Q1.r0.gmv]]），也可以由系统从快照生成整张表（[[table:Q1 cols=… rows=0-4]]），
表里每一格都是可点的片段；取值一律以快照为准，取回快照时复验哈希
- 口径卡表达式新增 cell(x, row, column)，lineage 精确到单元格
- 智能体开 cite_fields（配合 output_schema）后，循环结束做一次结构化抽取，每个字段标出取自哪次查询的哪一格，
再到快照里核对：一致记 verified；不一致以快照为准并告警；查不到的记为空值，永远不兜底成 0
- 代码节点新增 evidence_role（source / compute）和 code_sha；沙箱算出来的数不能被报告直接引用，要进口径卡
- 查询快照记下列类型，文本列按文本渲染（年份 "2026" 不再显示成「2,026」）
- 升级前发起的运行（停在审批上的）一律走旧逻辑：新的 task 只追加在循环之后，恢复时不会错号
证据接口与面板
- 片段链接上查询步骤：SQL、被引用的行加前后各 2 行、高亮到格；数据源可设 mask_columns 遮罩列，
遮罩在查询时记进快照，数据源事后改名或删除也照样遮罩（在有身份体系之前，遮罩只减少暴露，不是安全边界）
- 输入来源写明核对结果（与快照一致 / 模型报的值和快照不一致 / 没查到记为空）；口径卡缺输入时也给出完整的链
- 受管出具要在契约里声明 cells 才能引用单元格；受管与否记在所钉版本上，改画布不再让受管版本的正式运行降级
- 口径卡可以用 caliber_from 钉住另一个已发布工作流里的口径卡，上游有新版本时按 upgrade_policy 处置，
和子工作流同一套规则；子工作流节点也补上了升版处置的配置项
Copilot、校验与报错
- 问数据的答案里有数字时，搭 input → 智能体 → 报告 → 出口，报告直接引用查过的单元格
- 写 SQL 前核对数据源的表结构，SQL 里出现表结构里没有的列会被打回
- 不再搭「智能体文字 → 转换节点解析 JSON」这种图；转换节点的 JSON 报错分清是上游模型写坏了、
模板里裸插了模型文字（给出 | json 的改法），还是模板本身写错了
- 工具节点遇到「查询失败」「SQL 被拒绝」判为失败；发起运行前检查绑定的工具是否存在，不存在时直接拒绝并给出入口
二、发布前自动修复
- 问题带上机器编号（code）和修复 id；新增只读接口 POST /api/workflows/{id}/publish-check 和 /autofix
- 修复分三类：答案唯一、不降低要求的一键修复；要人拿主意的给选项（不替人选）；结构性问题交给 Copilot
- 一律先预览，不自动保存、不自动发布；删节点、删契约、放宽审批、关掉 strict、改级别等降低要求的改动一律拒绝，
Copilot 的方案也要过这一关；应用后重跑检查，错误必须变少且不能冒出新的
- 发布弹窗打开就先检查；问题面板新增「发布前检查」，平时就能看到、就地修掉
- 门禁修正：契约有 report_from 时不再要求 narrative（模板⑨可以发成受管）；全图默认审批为「全部放行」时同样拦下
- 修掉画布保存会抹掉全图默认（defaults）的老问题：以前任何一次保存都会把它清空，审批 always 因此被悄悄放宽
验证（沙箱）：tsc 干净，生产构建通过，pytest 2268 passed（两遍），check-all 17 项检查、3915 项全过
（新增 check-publish）；关键行为做了变异验证、全部抓到。
1712 lines
120 KiB
JavaScript
1712 lines
120 KiB
JavaScript
// 记录页（/runs）的检查：页签、状态筛选、分页、时间、待审批、删除保护、运行中接流、
|
||
// 失败的排错路径、封存凭证、提取模板。
|
||
//
|
||
// 守的是审查里抓到的几条死路：待审批的运行排在第 145 位、列表只取 100 条，点了
|
||
// 徽标也找不到；输入「失败」筛出来的是两条成功的运行；时间整体慢 8 小时；正在跑
|
||
// 的运行一动不动、却能删；封存过的正式运行一键就删掉了。
|
||
//
|
||
// 不写库：探针拦下所有非 GET 的 /api 请求，按场景回假响应。库里没有的形态（正在
|
||
// 跑的、封存过的正式运行）用 page.route 伪造 GET，用 routeWebSocket 伪造实时流。
|
||
// 前端和后端要指向同一份数据（前端的代理连的就是这个后端）。
|
||
// 跑之前前后端都得起着（./scripts/dev.sh），默认连 5273 / 8000。对别的实例（比如一份
|
||
// 沙箱拷贝）跑时带上地址：
|
||
// AGENTLAB_WEB=http://localhost:<前端端口> AGENTLAB_API=http://localhost:<后端端口>/api node scripts/check-runs.mjs
|
||
import { readFileSync } from 'node:fs'
|
||
import { chromium } from '../frontend/node_modules/playwright-core/index.mjs'
|
||
|
||
const WEB = process.env.AGENTLAB_WEB ?? 'http://localhost:5273'
|
||
const API = process.env.AGENTLAB_API ?? 'http://localhost:8000/api'
|
||
const CHROME = process.env.CHROME_PATH
|
||
?? '/Applications/Google Chrome.app/Contents/MacOS/Google Chrome'
|
||
|
||
const getJson = async (path) => (await fetch(API + path)).json()
|
||
|
||
// 仓库是公开的，这份输出会被贴进报告：沙箱库是用户开发库的拷贝，里面的工作流名、
|
||
// 节点名一律换成占位符再打印。本脚本源码里自己写着的串（夹具）本来就公开，不换。
|
||
const ownSource = readFileSync(new URL(import.meta.url), 'utf8')
|
||
const secrets = []
|
||
for (const w of await getJson('/workflows').catch(() => [])) {
|
||
secrets.push([w.name, '‹工作流名›'])
|
||
for (const n of w.graph?.nodes ?? []) secrets.push([n.data?.label ?? n.label, '‹节点名›'])
|
||
}
|
||
for (const r of await getJson('/runs?limit=200').catch(() => [])) secrets.push([r.workflow_name, '‹工作流名›'])
|
||
const maskList = [...new Map(secrets
|
||
.filter(([v]) => typeof v === 'string' && v.trim().length >= 2 && !ownSource.includes(v))
|
||
.map(([v, tag]) => [v, tag])).entries()]
|
||
.sort((a, b) => b[0].length - a[0].length)
|
||
const masked = (t) => maskList.reduce((s, [v, tag]) => s.split(v).join(tag), String(t))
|
||
|
||
let failed = 0
|
||
const check = (name, cond, detail = '') => {
|
||
console.log(` ${cond ? '✓' : '✗'} ${name}${detail ? ` — ${masked(detail)}` : ''}`)
|
||
if (!cond) failed++
|
||
}
|
||
|
||
/**
|
||
* 一节一节地跑：某一节里元素找不到、等待超时，只记成这一节失败，接着跑下一节，
|
||
* 不让一处卡住把后面的检查一起吞掉。页面是各节共用的：
|
||
* 出错那一节停在哪，下一节就从哪接着
|
||
*/
|
||
async function section(name, fn) {
|
||
console.log(`\n=== ${name} ===`)
|
||
try {
|
||
await fn()
|
||
} catch (e) {
|
||
check(`${name} 中途出错`, false, String(e?.message ?? e).split('\n')[0])
|
||
}
|
||
}
|
||
|
||
const browser = await chromium.launch({ executablePath: CHROME })
|
||
const ctx = await browser.newContext({ viewport: { width: 1440, height: 900 } })
|
||
const page = await ctx.newPage()
|
||
const errors = []
|
||
page.on('pageerror', (e) => errors.push(e.message))
|
||
|
||
// ---- 探针：非 GET 一律不放行，按场景回假响应 ----
|
||
const writes = []
|
||
const fakes = new Map() // `${METHOD} ${pathname}` → (url) => {status, json}
|
||
let offline = false // 断网：所有 /api 请求都够不着
|
||
let healthAborted = 0
|
||
await page.route('**/api/**', async (route) => {
|
||
const r = route.request()
|
||
const url = new URL(r.url())
|
||
if (offline) {
|
||
if (url.pathname === '/api/health') healthAborted++
|
||
return route.abort('internetdisconnected')
|
||
}
|
||
if (r.method() === 'GET') {
|
||
const fake = fakes.get(`GET ${url.pathname}`)
|
||
if (fake) return route.fulfill(fake(url))
|
||
return route.continue()
|
||
}
|
||
writes.push(`${r.method()} ${url.pathname}${url.search}`)
|
||
const fake = fakes.get(`${r.method()} ${url.pathname}`)
|
||
if (fake) return route.fulfill(fake(url, r))
|
||
return route.abort()
|
||
})
|
||
|
||
const rowsOf = () => page.locator('[data-runs-list] [data-run-id]')
|
||
const settle = async () => {
|
||
await page.waitForLoadState('networkidle')
|
||
await page.waitForTimeout(350)
|
||
}
|
||
const statuses = () => rowsOf().evaluateAll((els) => els.map((e) => e.getAttribute('data-status')))
|
||
/** 做一个会触发列表重查的动作，等到那一次列表请求（limit=50）回来、列表画完 */
|
||
const listAfter = async (act, match) => {
|
||
const done = page.waitForResponse((r) => {
|
||
const u = new URL(r.url())
|
||
return u.pathname === '/api/runs' && u.searchParams.get('limit') === '50' && match(u.searchParams)
|
||
}, { timeout: 8000 }).catch(() => null)
|
||
await act()
|
||
await done
|
||
await page.waitForTimeout(250)
|
||
}
|
||
const search = (text, match) => listAfter(() => page.locator('[data-runs-search]').fill(text), match)
|
||
const ids = () => rowsOf().evaluateAll((els) => els.map((e) => e.getAttribute('data-run-id')))
|
||
/** 页内记下详情 data-run-code 的每一次变化：一闪而过的中间态定时采样会漏掉 */
|
||
const recordCodes = () => page.evaluate(() => {
|
||
const el = document.querySelector('[data-run-detail]')
|
||
const seen = [el?.getAttribute('data-run-code')]
|
||
window.__runCodes = seen
|
||
if (el) new MutationObserver(() => seen.push(el.getAttribute('data-run-code')))
|
||
.observe(el, { attributes: true, attributeFilter: ['data-run-code'] })
|
||
})
|
||
const recordedCodes = () => page.evaluate(() => window.__runCodes ?? [])
|
||
|
||
// 各节共用的真数据，只读，在所有节之前取好。放在某一节里取的话，那一节的界面一出错，
|
||
// 后面十几节都拿着 undefined 报「中途出错」，各自真正的状态就看不见了
|
||
const pending = await getJson('/approvals?status=pending&limit=500')
|
||
const allRuns = await getJson('/runs?limit=200')
|
||
const listTop = await getJson('/runs?limit=50')
|
||
const wfHost = (await getJson('/workflows'))[0]
|
||
const base = allRuns.find((r) => r.status === 'succeeded' && !r.workflow_id)
|
||
|
||
// ------------------------------------------------------------------ 页签
|
||
|
||
await section('页签与地址', async () => {
|
||
await page.goto(`${WEB}/runs`, { waitUntil: 'networkidle' })
|
||
await rowsOf().first().waitFor({ timeout: 10000 })
|
||
check('默认是「全部」页签', await page.locator('[role=tab][data-tab=all]').getAttribute('aria-selected') === 'true')
|
||
check('页头写着「记录」', (await page.locator('[data-runs-page] header h1').innerText()).includes('记录'))
|
||
const headerH = await page.locator('[data-runs-page] > header').evaluate((el) => el.getBoundingClientRect().height)
|
||
check('页头和管理页一样高（48px，toast 不压工具栏）', headerH === 48, `${headerH}px`)
|
||
|
||
// 键盘：↓ 在行之间移动焦点，不打开
|
||
await rowsOf().first().focus()
|
||
await page.keyboard.press('ArrowDown')
|
||
const focused = await page.evaluate(() => document.activeElement?.getAttribute('data-run-id'))
|
||
check('↓ 把焦点移到下一行', focused === (await ids())[1] && !/\/runs\/./.test(new URL(page.url()).pathname))
|
||
|
||
await page.locator('[role=tab][data-tab=failed]').click()
|
||
await settle()
|
||
check('点「失败」地址变成 ?tab=failed', new URL(page.url()).searchParams.get('tab') === 'failed')
|
||
const failedStatuses = await statuses()
|
||
check('「失败」页签里全是失败的运行', failedStatuses.length > 0 && failedStatuses.every((s) => s === 'failed'),
|
||
`${failedStatuses.length} 行`)
|
||
check('失败行的第二行是原因，不是输入', await page.locator('[data-runs-list] [data-run-reason]').count() === failedStatuses.length)
|
||
|
||
const runningReq = page.waitForRequest((r) => new URL(r.url()).pathname === '/api/runs'
|
||
&& new URL(r.url()).searchParams.get('status') === 'running,queued')
|
||
await page.locator('[role=tab][data-tab=running]').click()
|
||
check('「运行中」页签按 status=running,queued 查服务端', await runningReq.then(() => true, () => false))
|
||
await settle()
|
||
check('「运行中」页签里只有在跑的', (await statuses()).every((s) => s === 'running' || s === 'queued'))
|
||
|
||
await page.goto(`${WEB}/runs?tab=bogus`, { waitUntil: 'networkidle' })
|
||
await page.waitForTimeout(300)
|
||
check('认不出的页签落回「全部」并纠正地址', !new URL(page.url()).searchParams.has('tab'))
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 待审批
|
||
|
||
await section('待审批页签', async () => {
|
||
// 「别处批掉了」要用的实时流：routeWebSocket 只管注册之后加载的页面，先挂上
|
||
let resumeSocket = false
|
||
if (pending.length) {
|
||
const target = pending[0]
|
||
const lastSeq = (await getJson(`/runs/${target.run_id}/events`)).at(-1)?.seq ?? 0
|
||
await page.routeWebSocket(new RegExp(`/api/runs/${target.run_id}/stream`), (ws) => {
|
||
resumeSocket = true
|
||
const t = Date.now() / 1000
|
||
ws.send(JSON.stringify({ seq: lastSeq + 1, type: 'run.resumed', node_id: target.node_id, ts: t, data: { actor: '张工' } }))
|
||
ws.send(JSON.stringify({ seq: lastSeq + 2, type: 'node.started', node_id: target.node_id, ts: t + 0.05, data: { resumed: true } }))
|
||
})
|
||
}
|
||
await page.goto(`${WEB}/runs?tab=approvals`, { waitUntil: 'networkidle' })
|
||
await page.waitForTimeout(400)
|
||
const approvalRows = page.locator('[data-approvals-list] [data-approval-id]')
|
||
const shownApprovals = await approvalRows.evaluateAll((els) => els.map((e) => e.getAttribute('data-approval-id')))
|
||
check('沙箱里的待审批都在页签里', pending.length > 0 && pending.every((a) => shownApprovals.includes(a.id)),
|
||
`API ${pending.length} 条 / 页面 ${shownApprovals.length} 条`)
|
||
const deep = pending.filter((a) => allRuns.findIndex((r) => r.id === a.run_id) >= 100)
|
||
check('排在最近 100 条之外的待审批也看得到（原来的死路）', deep.every((a) => shownApprovals.includes(a.id)),
|
||
`${deep.length} 条在第 100 名之后`)
|
||
check('每条都写着等了多久', await page.locator('[data-approvals-list] [data-approval-age]').count() === shownApprovals.length)
|
||
if (pending.length) {
|
||
const rowText = await page.locator(`[data-approval-id="${pending[0].id}"]`).innerText()
|
||
const hasWf = rowText.includes(pending[0].workflow_name ?? '')
|
||
const hasNode = rowText.includes(pending[0].node_label ?? pending[0].node_id)
|
||
// 名字来自沙箱库，只报在不在
|
||
check('每条写着工作流名和节点', hasWf && hasNode, `工作流名 ${hasWf ? '在' : '缺'} · 节点 ${hasNode ? '在' : '缺'}`)
|
||
check('每条有处理入口', rowText.includes('去处理'))
|
||
}
|
||
const badge = await page.locator('[role=tab][data-tab=approvals]').innerText()
|
||
check('页签上的数和待审批条数一致', badge.includes(String(pending.length)), badge.replace(/\s+/g, ' '))
|
||
if (pending.length) {
|
||
const target = pending[0]
|
||
await page.locator(`[data-approval-id="${target.id}"]`).click()
|
||
await page.waitForURL(`**/runs/${target.run_id}**`)
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
await page.waitForTimeout(500)
|
||
check('点进去是那次运行，地址保留 ?tab=approvals', new URL(page.url()).searchParams.get('tab') === 'approvals')
|
||
check('详情显示等审批的横幅', await page.locator('[data-run-banner=waiting]').count() === 1)
|
||
check('审批卡在时间线里', await page.locator(`[data-approval-card="${target.id}"]`).count() === 1)
|
||
check('详情头的状态是「等待审批」', await page.locator('[data-run-detail]').getAttribute('data-run-code') === 'waiting')
|
||
const docScroll = await page.evaluate(() => document.scrollingElement.scrollHeight - innerHeight)
|
||
check('整页不滚动：滚的是时间线自己', docScroll <= 0, `溢出 ${docScroll}px`)
|
||
|
||
// 别处（画布、问数据、另一个标签页）把这张批掉了：catalog 轮询发现审批没了。
|
||
// 这一刻 run 还没重查的话是「interrupted、没有审批」，会被错当成已挂起——
|
||
// 要一起重查，看到它接着跑了，并接上实时流
|
||
// 后端先把审批记成已回复、再把运行改成 running：第一次重查故意落在这个空档里
|
||
// （运行还是 interrupted、审批已经没了），不能就此判成挂起
|
||
const full = await getJson(`/runs/${target.run_id}`)
|
||
let runReads = 0
|
||
fakes.set('GET /api/approvals', () => ({ status: 200, json: [] }))
|
||
fakes.set(`GET /api/runs/${target.run_id}`, () => ({
|
||
status: 200, json: { ...full, status: runReads++ === 0 ? 'interrupted' : 'running' },
|
||
}))
|
||
await recordCodes()
|
||
const resumed = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'running',
|
||
null, { timeout: 9000 },
|
||
).then(() => true, () => false)
|
||
await page.waitForTimeout(300)
|
||
const codes = await recordedCodes()
|
||
check('别处批掉后：接上实时流、状态变成运行中', resumed && resumeSocket, codes.at(-1) ?? '')
|
||
check('中间没有闪成「已挂起」', !codes.includes('held'), [...new Set(codes)].join(' → '))
|
||
fakes.delete('GET /api/approvals')
|
||
fakes.delete(`GET /api/runs/${target.run_id}`)
|
||
|
||
// 别处批掉，剩下的几步在下一轮轮询之前就跑完了（审批靠近末尾的都这样）：
|
||
// 重查时运行已经是已完成。头上跟着变不够，别处发生的事件要补进时间线——
|
||
// 原来只在「还在跑」时接流，这种就停在审批卡上，连「放行」那一行都没有
|
||
const other = pending[1] ?? pending[0]
|
||
const otherRun = await getJson(`/runs/${other.run_id}`)
|
||
const otherEvents = await getJson(`/runs/${other.run_id}/events`)
|
||
const lastOther = otherEvents.at(-1)?.seq ?? 0
|
||
const tf = Date.now() / 1000
|
||
const tail = [
|
||
{ seq: lastOther + 1, type: 'human.resolved', node_id: other.node_id, ts: tf, data: { response: { approved: true }, actor: '张工' } },
|
||
{ seq: lastOther + 2, type: 'run.resumed', node_id: null, ts: tf, data: { actor: '张工' } },
|
||
{ seq: lastOther + 3, type: 'node.finished', node_id: other.node_id, ts: tf + 0.01, data: { duration_ms: 1 } },
|
||
{ seq: lastOther + 4, type: 'run.finished', node_id: null, ts: tf + 0.02,
|
||
data: { output: { answer: '已发布' }, usage: {}, timing: { wall_ms: 1000, active_ms: 30, wait_ms: 970 } } },
|
||
]
|
||
await page.goto(`${WEB}/runs/${other.run_id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail][data-run-code=waiting]').waitFor({ timeout: 8000 }).catch(() => {})
|
||
const restPending = pending.filter((a) => a.id !== other.id)
|
||
fakes.set('GET /api/approvals', (url) => ({
|
||
status: 200,
|
||
json: restPending.filter((a) => !url.searchParams.get('run_id') || a.run_id === url.searchParams.get('run_id')),
|
||
}))
|
||
fakes.set(`GET /api/runs/${other.run_id}`, () => ({
|
||
status: 200,
|
||
json: { ...otherRun, status: 'succeeded', output: { answer: '已发布' }, finished_at: new Date().toISOString() },
|
||
}))
|
||
fakes.set(`GET /api/runs/${other.run_id}/events`, () => ({ status: 200, json: [...otherEvents, ...tail] }))
|
||
await recordCodes()
|
||
const finishedFast = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'succeeded',
|
||
null, { timeout: 12000 },
|
||
).then(() => true, () => false)
|
||
await page.waitForTimeout(400)
|
||
const fastCodes = await recordedCodes()
|
||
check('别处批掉、已经跑完：状态变成已完成', finishedFast, [...new Set(fastCodes)].join(' → '))
|
||
check('跑完之前没有闪成「已挂起」', !fastCodes.includes('held'), fastCodes.join(' → '))
|
||
const fastStream = (await page.locator('[data-run-detail] > div').nth(0).innerText()).replace(/\s+/g, ' ')
|
||
// 时间线里是沙箱真实运行的内容（节点名、SQL、预览），只报字数，不打原文
|
||
check('别处发生的事件补进了时间线（「张工 放行了」）', fastStream.includes('张工 放行了'), `时间线 ${fastStream.length} 字`)
|
||
const fastCount = (await page.locator('[data-run-detail] > header').innerText()).match(/([\d,]+) 条事件/)?.[1]
|
||
check('详情头的事件数跟着补齐', fastCount === (otherEvents.length + tail.length).toLocaleString('en-US'),
|
||
`${fastCount} / 应为 ${otherEvents.length + tail.length}`)
|
||
fakes.delete('GET /api/approvals')
|
||
fakes.delete(`GET /api/runs/${other.run_id}`)
|
||
fakes.delete(`GET /api/runs/${other.run_id}/events`)
|
||
|
||
// 断开期间别处批掉了：恢复那一刻重拉，同样可能撞上「审批已回复、运行还没改」
|
||
// 的空档。恢复走的是另一条路（useOnReconnect），也不能就此判成挂起
|
||
await page.goto(`${WEB}/runs/${target.run_id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail][data-run-code=waiting]').waitFor({ timeout: 8000 }).catch(() => {})
|
||
await recordCodes()
|
||
healthAborted = 0
|
||
offline = true
|
||
// 等 catalog 的心跳失败、探活也失败，判成断开（之后 4 秒重试 /health）
|
||
for (let i = 0; i < 60 && !healthAborted; i++) await page.waitForTimeout(200)
|
||
await page.waitForTimeout(200)
|
||
let gapReads = 0
|
||
fakes.set('GET /api/approvals', () => ({ status: 200, json: [] }))
|
||
fakes.set(`GET /api/runs/${target.run_id}`, () => ({
|
||
status: 200, json: { ...full, status: gapReads++ === 0 ? 'interrupted' : 'running' },
|
||
}))
|
||
offline = false
|
||
const back = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'running',
|
||
null, { timeout: 15000 },
|
||
).then(() => true, () => false)
|
||
await page.waitForTimeout(300)
|
||
const backCodes = await recordedCodes()
|
||
check('断网恢复时撞上空档：认出它已经接着跑了', healthAborted > 0 && back, `探活失败 ${healthAborted} 次`)
|
||
check('断网恢复时撞上空档：也没有闪成「已挂起」', !backCodes.includes('held'), backCodes.join(' → '))
|
||
fakes.delete('GET /api/approvals')
|
||
fakes.delete(`GET /api/runs/${target.run_id}`)
|
||
}
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 筛选
|
||
|
||
await section('状态筛选', async () => {
|
||
await page.goto(`${WEB}/runs`, { waitUntil: 'networkidle' })
|
||
await rowsOf().first().waitFor()
|
||
const listRequests = []
|
||
const onReq = (r) => { if (new URL(r.url()).pathname === '/api/runs') listRequests.push(new URL(r.url()).searchParams) }
|
||
page.on('request', onReq)
|
||
await search('失败', (p) => p.get('status') === 'failed')
|
||
const zh = await statuses()
|
||
check('输入「失败」只出失败的运行', zh.length > 0 && zh.every((s) => s === 'failed'), `${zh.length} 行`)
|
||
check('状态走服务端参数 status=failed，不当名称搜',
|
||
listRequests.some((p) => p.get('status') === 'failed' && !p.get('q')))
|
||
check('提示按状态筛选', (await page.locator('[data-runs-hint]').innerText()).includes('失败'))
|
||
check('「全部」分段里「失败」亮着', await page.locator('[data-segment=failed]').getAttribute('aria-pressed') === 'true')
|
||
|
||
await search('已完成', (p) => p.get('status') === 'succeeded')
|
||
const done = await statuses()
|
||
check('输入「已完成」只出已完成的', done.length > 0 && done.every((s) => s === 'succeeded'))
|
||
|
||
await search('等待审批', (p) => p.get('status') === 'interrupted')
|
||
const waitingIds = await ids()
|
||
check('输入「等待审批」能找到所有停在审批上的运行',
|
||
pending.every((a) => waitingIds.includes(a.run_id)) && (await statuses()).every((s) => s === 'waiting'),
|
||
`${waitingIds.length} 行`)
|
||
|
||
await search('', (p) => !p.get('status'))
|
||
await listAfter(() => page.locator('[data-segment=cancelled]').click(), (p) => p.get('status') === 'cancelled')
|
||
const cancelled = await statuses()
|
||
check('点「已取消」分段只出已取消的', cancelled.length > 0 && cancelled.every((s) => s === 'cancelled'))
|
||
check('分段写进地址 ?status=cancelled', new URL(page.url()).searchParams.get('status') === 'cancelled')
|
||
await page.locator('[data-segment=all]').click()
|
||
await settle()
|
||
|
||
await search('zz一个不存在的工作流zz', (p) => p.get('q') === 'zz一个不存在的工作流zz')
|
||
check('没有匹配时说「没有匹配」，不说「还没有运行记录」',
|
||
await page.getByText('没有匹配的运行').count() === 1 && await page.getByText('还没有运行记录').count() === 0)
|
||
await page.getByRole('button', { name: '清除筛选' }).click()
|
||
await settle()
|
||
check('「清除筛选」之后列表回来了', await rowsOf().count() > 0 && !new URL(page.url()).searchParams.has('q'))
|
||
page.off('request', onReq)
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 分页
|
||
|
||
await section('分页', async () => {
|
||
const firstPage = await rowsOf().count()
|
||
check('第一页 50 条', firstPage === 50, String(firstPage))
|
||
const beforeReq = page.waitForRequest((r) => new URL(r.url()).pathname === '/api/runs' && new URL(r.url()).searchParams.has('before'))
|
||
await page.locator('[data-runs-more]').click()
|
||
const req = await beforeReq
|
||
await settle()
|
||
const secondIds = await ids()
|
||
check('「加载更多」带 before 游标', !!new URL(req.url()).searchParams.get('before'))
|
||
check('加载后变成 100 条', secondIds.length === 100, String(secondIds.length))
|
||
check('没有重复的行', new Set(secondIds).size === secondIds.length)
|
||
const apiIds = (await getJson('/runs?limit=100')).map((r) => r.id)
|
||
check('两页拼起来和后端的前 100 条一致', JSON.stringify(apiIds) === JSON.stringify(secondIds))
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 时间
|
||
|
||
await section('时间不再慢 8 小时', async () => {
|
||
const sample = (await getJson('/runs?limit=5'))[0]
|
||
const shownTime = await page.locator(`[data-run-id="${sample.id}"] [data-run-time]`).innerText()
|
||
const [expected, naive, offset] = await page.evaluate((iso) => {
|
||
const pad = (n) => String(n).padStart(2, '0')
|
||
const hm = (d) => `${pad(d.getHours())}:${pad(d.getMinutes())}`
|
||
// 带不带 Z 都按 UTC 解析；naive 是以前把 UTC 当本地时间的读法
|
||
const utc = new Date(/Z|[+-]\d\d:?\d\d$/.test(iso) ? iso : iso + 'Z')
|
||
const local = new Date(iso.replace(/Z$|[+-]\d\d:?\d\d$/, ''))
|
||
return [hm(utc), hm(local), new Date().getTimezoneOffset()]
|
||
}, sample.created_at)
|
||
check('列表时间按 UTC 换算成本地', shownTime.includes(expected), `显示 ${shownTime}，应为 ${expected}（created_at=${sample.created_at}）`)
|
||
if (offset !== 0) check('不是把 UTC 当本地的那个错读', !shownTime.includes(naive) || naive === expected, `错读会是 ${naive}`)
|
||
const title = await page.locator(`[data-run-id="${sample.id}"] [data-run-time]`).getAttribute('title')
|
||
check('悬停给完整时间和时区', /\d{4}-\d{2}-\d{2} \d{2}:\d{2}:\d{2} \(UTC[+-]\d{2}:\d{2}\)/.test(title ?? ''), title ?? '')
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 失败的排错路径
|
||
|
||
await section('失败：指到节点、原因、下一步', async () => {
|
||
const failedRuns = await getJson('/runs?status=failed&limit=200')
|
||
const authFail = failedRuns.find((r) => r.workflow_id && /401|Authentication/i.test(r.error ?? ''))
|
||
if (authFail) {
|
||
const full = await getJson(`/runs/${authFail.id}`)
|
||
// 实时流伪造成「接着跑之后又动起来」。routeWebSocket 只管注册之后加载的页面，
|
||
// 所以要在打开详情之前挂上
|
||
const last = (await getJson(`/runs/${authFail.id}/events`)).at(-1)
|
||
await page.routeWebSocket(new RegExp(`/api/runs/${authFail.id}/stream`), (ws) => {
|
||
const t = Date.now() / 1000
|
||
ws.send(JSON.stringify({ seq: last.seq + 1, type: 'run.resumed', node_id: null, ts: t, data: { from: full.error_node_id } }))
|
||
ws.send(JSON.stringify({ seq: last.seq + 2, type: 'node.started', node_id: full.error_node_id, ts: t + 0.1, data: { resumed: true } }))
|
||
})
|
||
await page.goto(`${WEB}/runs/${authFail.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed]').waitFor()
|
||
check('横幅指到失败的节点', await page.locator(`[data-failed-node="${full.error_node_id}"]`).count() === 1, full.error_node_id)
|
||
check('原始异常翻成人话', (await page.locator('[data-failed-title]').innerText()).includes('鉴权'))
|
||
check('有「接着跑」', await page.locator('[data-run-banner=failed] [data-action=continue]').count() === 1)
|
||
check('有「去模型接入」', await page.locator('[data-run-banner=failed] [data-action=settings]').count() === 1)
|
||
check('有「复制错误」', await page.locator('[data-run-banner=failed] [data-action=copy-error]').count() === 1)
|
||
// 时间线里的报错照原样画横幅那份拆好的失败（3C REQ-14）：以前只交一个标题字符串，流里拿它
|
||
// 再讲一遍，原因、怎么办丢了，「去模型接入」的直达入口也没有
|
||
const bannerTitle = (await page.locator('[data-failed-title]').innerText().catch(() => '')).trim()
|
||
// 横幅标题那一行下面紧跟的一行是原因（没有原因时是「下一步：…」，不算）
|
||
const bannerReason = await page.evaluate(() => {
|
||
const next = document.querySelector('[data-run-banner=failed] [data-failed-title]')?.parentElement?.nextElementSibling
|
||
const text = next?.textContent?.trim() ?? ''
|
||
return text.startsWith('下一步') ? '' : text
|
||
})
|
||
const turnError = page.locator('[data-view-pane=stream] [data-turn-error]')
|
||
const turnErrorText = (await turnError.innerText().catch(() => '')).replace(/\s+/g, ' ')
|
||
const sameTitle = turnErrorText.includes(bannerTitle)
|
||
const sameReason = !bannerReason || turnErrorText.includes(bannerReason.replace(/\s+/g, ' '))
|
||
const fixLink = await turnError.locator('[data-fix=settings]').count() === 1
|
||
const onceTitle = (await turnError.locator('.font-medium').first().innerText().catch(() => '')).trim() === bannerTitle
|
||
// 报错原文来自沙箱里的真实运行，只报各项对不对得上
|
||
check('时间线里的报错：标题、原因和横幅同一句，出错的节点只说一遍，给「去模型接入」',
|
||
sameTitle && sameReason && fixLink && onceTitle,
|
||
`标题 ${sameTitle ? '同' : '异'} · 原因 ${sameReason ? '同' : '异'} · 直达入口 ${fixLink ? '有' : '无'} · 标题行 ${onceTitle ? '同' : '异'}`)
|
||
check('失败的运行不给「提取模板」', await page.locator('[data-action=extract]').count() === 0)
|
||
// 横幅里的定位是排错的主路，详情头上的回放是看全程：两处都得够得着画布。失败的节点
|
||
// 在工作流现在的图里已经没了的话（之后改过结构），对准它会落空：横幅改给「在航迹中看」，
|
||
// 详情头照样回放、只是不带 focus。两种情形下面的航迹夹具各测一遍，这里按库里的实情测
|
||
const authWf = (await getJson('/workflows')).find((w) => w.id === authFail.workflow_id)
|
||
const stillThere = !!authWf?.graph?.nodes?.some((n) => n.id === full.error_node_id)
|
||
const canvasBase = `/studio/${authFail.workflow_id}?run=${authFail.id}`
|
||
const headLink = page.locator('[data-run-detail] > header [data-action=open-canvas]')
|
||
const headHref = await headLink.getAttribute('href').catch(() => null)
|
||
const headText = await headLink.innerText().catch(() => '')
|
||
if (stillThere) {
|
||
const href = await page.locator('[data-run-banner=failed] [data-action=locate]').getAttribute('href').catch(() => null)
|
||
check('「在画布中定位」带 run 和 focus', href === `${canvasBase}&focus=${full.error_node_id}`, href ?? '')
|
||
check('失败的运行详情头上也有「在画布中回放」，对准失败的节点',
|
||
headText.includes('在画布中回放') && headHref === href, headHref ?? '没有这个按钮')
|
||
} else {
|
||
check('失败的节点在工作流现在的图里没了：不给落空的「在画布中定位」，改给「在航迹中看」',
|
||
await page.locator('[data-run-banner=failed] [data-action=locate]').count() === 0
|
||
&& await page.locator('[data-run-banner=failed] [data-action=locate-trace]').count() === 1)
|
||
check('失败的运行详情头上照样「在画布中回放」，不带对不上的 focus',
|
||
headText.includes('在画布中回放') && headHref === canvasBase, headHref ?? '没有这个按钮')
|
||
}
|
||
|
||
// 接着跑：POST 伪造成功，实时流在上面已经伪造好
|
||
fakes.set(`POST /api/runs/${authFail.id}/continue`, () => ({
|
||
status: 200, json: { ...full, status: 'running', error: null, finished_at: null },
|
||
}))
|
||
await page.locator('[data-run-banner=failed] [data-action=continue]').click()
|
||
await page.locator('[data-run-feedback=continued]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('接着跑发的是 POST /continue', writes.includes(`POST /api/runs/${authFail.id}/continue`))
|
||
check('接着跑之后留下回执', await page.locator('[data-run-feedback=continued]').count() === 1)
|
||
const flipped = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'running',
|
||
null, { timeout: 5000 },
|
||
).then(() => true, () => false)
|
||
check('接流后状态变成运行中、出现「停止」', flipped && await page.locator('[data-action=stop]').count() === 1)
|
||
fakes.delete(`POST /api/runs/${authFail.id}/continue`)
|
||
} else {
|
||
check('沙箱里有一条有工作流的 401 失败运行', false)
|
||
}
|
||
|
||
const missingInput = failedRuns.find((r) => /缺少必填输入/.test(r.error ?? '') && !r.workflow_id)
|
||
if (missingInput) {
|
||
await page.goto(`${WEB}/runs/${missingInput.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed]').waitFor()
|
||
check('缺输入的失败不给「接着跑」（原样接着跑还会失败）',
|
||
await page.locator('[data-run-banner=failed] [data-action=continue]').count() === 0)
|
||
check('未保存的工作流不给「在画布中定位」', await page.locator('[data-action=locate]').count() === 0)
|
||
|
||
// 补上缺的那一项重新运行：用这次的图快照（未保存的图也能重跑），其余输入照旧
|
||
const field = missingInput.error.match(/缺少必填输入[：:]\s*(\S+)/)[1]
|
||
const rerunBtn = page.locator('[data-run-banner=failed] [data-action=rerun]')
|
||
check(`缺输入的失败给「补上「${field}」重新运行」`, await rerunBtn.count() === 1)
|
||
const RERUN = 'fake0rerun000000000000000000000'
|
||
let startBody = null
|
||
fakes.set('POST /api/runs', (url, req) => {
|
||
startBody = req.postDataJSON()
|
||
return { status: 200, json: { ...missingInput, id: RERUN, status: 'queued', error: null } }
|
||
})
|
||
fakes.set(`GET /api/runs/${RERUN}`, () => ({ status: 200, json: { ...missingInput, id: RERUN, status: 'succeeded', error: null } }))
|
||
fakes.set(`GET /api/runs/${RERUN}/events`, () => ({ status: 200, json: [] }))
|
||
await rerunBtn.click()
|
||
const ask = page.getByRole('dialog')
|
||
await ask.waitFor()
|
||
await ask.locator('input, textarea').first().fill('检查用的主题')
|
||
await ask.getByRole('button', { name: '重新运行' }).click()
|
||
const moved = await page.waitForURL((u) => u.pathname === `/runs/${RERUN}`, { timeout: 5000 }).then(() => true, () => false)
|
||
check('补上之后发起新运行并跳过去', moved, page.url())
|
||
check('新运行带着补上的那一项和原来的其余输入',
|
||
startBody?.input?.[field] === '检查用的主题'
|
||
&& Object.keys(missingInput.input ?? {}).every((k) => k === field || k in (startBody?.input ?? {})),
|
||
JSON.stringify(startBody?.input ?? null))
|
||
check('跑的是这次运行时的图快照', Array.isArray(startBody?.graph?.nodes) && startBody.graph.nodes.length > 0 && !startBody.workflow_id)
|
||
fakes.delete('POST /api/runs')
|
||
|
||
// 补上之后发起被拒：绑定的工具在本机不存在（422 run_tool_missing）。和画布上发起被拒同一套，
|
||
// 报错里给直达入口（数据源工具去数据页），不是只有一句 toast
|
||
await page.goto(`${WEB}/runs/${missingInput.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed] [data-action=rerun]').waitFor()
|
||
fakes.set('POST /api/runs', () => ({ status: 422, json: {
|
||
detail: '绑定的工具在本机不存在：「查数」（调用工具）绑的 db_query__nope。去数据页接入，或在节点里重新选', code: 'run_tool_missing' } }))
|
||
await page.locator('[data-run-banner=failed] [data-action=rerun]').click()
|
||
const refused = page.getByRole('dialog')
|
||
await refused.waitFor()
|
||
await refused.locator('input, textarea').first().fill('检查用的主题')
|
||
await refused.getByRole('button', { name: '重新运行' }).click()
|
||
const toData = page.getByRole('button', { name: '去数据页接入' })
|
||
await toData.waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('补上重新运行被拒（工具不在本机）：报错里有「去数据页接入」', await toData.count() === 1)
|
||
const said = await page.getByText('绑定的工具「db_query__nope」在本机不存在').first().innerText().catch(() => '')
|
||
check('……点名那个工具，说清这次运行没有发起', said.includes('db_query__nope') && said.includes('没有发起'), said.slice(0, 120))
|
||
check('……人还在这条运行上', new URL(page.url()).pathname === `/runs/${missingInput.id}`, page.url())
|
||
await toData.click().catch(() => {})
|
||
await page.waitForURL((u) => u.pathname.startsWith('/data'), { timeout: 5000 }).catch(() => {})
|
||
check('……点了去数据页', new URL(page.url()).pathname.startsWith('/data'), page.url())
|
||
fakes.delete('POST /api/runs')
|
||
|
||
// 正式运行缺输入：只能跑「当前」发布的版本。之后又发布过新版的话，带着原来
|
||
// 的版本号会被后端 409（「vN 不是当前发布版本」），所以不带，并在弹窗里说清跑哪一版
|
||
const published = (await getJson('/workflows')).find((w) => (w.published_version ?? 0) > 1)
|
||
if (published) {
|
||
const FORMAL = 'fake0formalmissing0000000000000'
|
||
const old = published.published_version - 1
|
||
const formalRun = {
|
||
...missingInput, id: FORMAL, run_class: 'formal', workflow_id: published.id, workflow_name: published.name,
|
||
version: old, manifest_hash: null, manifest_seq: null,
|
||
}
|
||
const missingEvents = await getJson(`/runs/${missingInput.id}/events`)
|
||
fakes.set(`GET /api/runs/${FORMAL}`, () => ({ status: 200, json: formalRun }))
|
||
fakes.set(`GET /api/runs/${FORMAL}/events`, () => ({ status: 200, json: missingEvents }))
|
||
fakes.set(`GET /api/runs/${FORMAL}/graph`, () => ({ status: 200, json: { graph: published.graph, workflow_id: published.id, version: old } }))
|
||
let formalBody = null
|
||
fakes.set('POST /api/runs', (url, req) => {
|
||
formalBody = req.postDataJSON()
|
||
return { status: 200, json: { ...formalRun, id: RERUN, status: 'queued', error: null, version: published.published_version } }
|
||
})
|
||
await page.goto(`${WEB}/runs/${FORMAL}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed] [data-action=rerun]').click()
|
||
const formalAsk = page.getByRole('dialog')
|
||
await formalAsk.waitFor()
|
||
const askText = (await formalAsk.innerText()).replace(/\s+/g, ' ')
|
||
check('正式运行重跑：弹窗写明跑的是当前发布版本', askText.includes(`v${published.published_version}`) && askText.includes(`v${old}`),
|
||
askText.slice(0, 90))
|
||
await formalAsk.locator('input, textarea').first().fill('检查用的主题')
|
||
await formalAsk.getByRole('button', { name: '重新运行' }).click()
|
||
await page.waitForURL((u) => u.pathname === `/runs/${RERUN}`, { timeout: 5000 }).catch(() => {})
|
||
check('正式运行重跑不带旧版本号（由后端取当前发布版本）',
|
||
formalBody?.run_class === 'formal' && formalBody?.workflow_id === published.id
|
||
&& !('version' in (formalBody ?? {})) && !formalBody?.graph && formalBody?.input?.[field] === '检查用的主题',
|
||
JSON.stringify(formalBody ?? null).slice(0, 120))
|
||
fakes.delete('POST /api/runs')
|
||
fakes.delete(`GET /api/runs/${FORMAL}`)
|
||
fakes.delete(`GET /api/runs/${FORMAL}/events`)
|
||
fakes.delete(`GET /api/runs/${FORMAL}/graph`)
|
||
} else {
|
||
check('沙箱里有一个发布过两版以上的工作流', false)
|
||
}
|
||
}
|
||
|
||
// 条件表达式写错了：这一页的接着跑不带图，跑的还是那条写错的条件，只会再失败
|
||
// 一次。不给接着跑，回画布定位是主路
|
||
const syntaxFail = failedRuns.find((r) => /表达式语法错误|invalid syntax/.test(r.error ?? '') && r.workflow_id)
|
||
if (syntaxFail) {
|
||
await page.goto(`${WEB}/runs/${syntaxFail.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed]').waitFor()
|
||
check('表达式写错的失败不给「接着跑」', await page.locator('[data-run-banner=failed] [data-action=continue]').count() === 0)
|
||
const locate = page.locator('[data-run-banner=failed] [data-action=locate]')
|
||
// 失败的节点在工作流现在的图里没了的话，定位落空，主路改成去航迹看（定位作主按钮的
|
||
// 情形由后面「模型没有真正调用工具」的夹具测）
|
||
const synNode = (await getJson(`/runs/${syntaxFail.id}`)).error_node_id
|
||
const synWf = (await getJson('/workflows')).find((w) => w.id === syntaxFail.workflow_id)
|
||
if (synWf?.graph?.nodes?.some((n) => n.id === synNode)) {
|
||
check('「在画布中定位」成了主按钮', await locate.count() === 1 && /\bbtn-primary\b/.test(await locate.getAttribute('class') ?? ''))
|
||
} else {
|
||
check('失败的节点在工作流现在的图里没了：不给落空的定位，给「在航迹中看」',
|
||
await locate.count() === 0 && await page.locator('[data-run-banner=failed] [data-action=locate-trace]').count() === 1)
|
||
}
|
||
} else {
|
||
check('沙箱里有一条表达式写错的失败运行', false)
|
||
}
|
||
|
||
// ------------------------------------------------------------------ 挂起
|
||
|
||
const held = (await getJson('/runs?status=interrupted&limit=200')).find((r) => !pending.some((a) => a.run_id === r.id))
|
||
if (held) {
|
||
console.log('\n=== 挂起（没有审批的中断） ===')
|
||
await page.goto(`${WEB}/runs/${held.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
await page.waitForTimeout(500)
|
||
check('显示「已挂起」而不是「等待审批」', await page.locator('[data-run-detail]').getAttribute('data-run-code') === 'held')
|
||
check('挂起横幅带「接着跑」', await page.locator('[data-run-banner=held] [data-action=resume]').count() === 1)
|
||
// 挂起的没人会再去接：不放弃的话它在记录里永远挂着「可续跑」
|
||
check('挂起横幅也能放弃这次运行', await page.locator('[data-run-banner=held] [data-action=abandon]').count() === 1)
|
||
}
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 封存凭证
|
||
|
||
await section('封存凭证常驻', async () => {
|
||
const sealed = allRuns.find((r) => r.status === 'succeeded' && r.manifest_hash && !r.workflow_id)
|
||
await page.goto(`${WEB}/runs/${sealed.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-provenance]').waitFor()
|
||
check('凭证条写着「已封存」和清单哈希前缀',
|
||
(await page.locator('[data-run-provenance]').innerText()).includes(sealed.manifest_hash.slice(0, 10)))
|
||
await page.locator('[data-verify-btn]').click()
|
||
await page.locator('[data-verify=ok], [data-verify=mismatch]').first().waitFor({ timeout: 8000 })
|
||
await page.waitForTimeout(4500)
|
||
check('核对结果 4 秒后还在（不是 toast）', await page.locator('[data-verify=ok]').count() === 1)
|
||
check('写明几条事件与清单一致', /\d+ 条事件与清单一致/.test(await page.locator('[data-verify=ok]').innerText()))
|
||
await page.locator('[data-prov-toggle]').click()
|
||
check('展开能看到完整清单哈希', (await page.locator('[data-prov-detail]').innerText()).includes(sealed.manifest_hash))
|
||
await page.goto(`${WEB}/runs/${allRuns[1].id}`, { waitUntil: 'networkidle' })
|
||
await page.goto(`${WEB}/runs/${sealed.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-provenance]').waitFor()
|
||
check('切走再回来，核对结果还在', await page.locator('[data-verify=ok]').count() === 1)
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 时长
|
||
|
||
let timed
|
||
await section('三种时长', async () => {
|
||
timed = allRuns.find((r) => r.usage?.wall_ms != null && r.usage?.wait_ms > 0)
|
||
if (timed) {
|
||
await page.goto(`${WEB}/runs/${timed.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-telemetry]').waitFor()
|
||
const wall = await page.locator('[data-telemetry=wall]').innerText()
|
||
const active = await page.locator('[data-telemetry=active]').innerText()
|
||
const wait = await page.locator('[data-telemetry=wait]').innerText()
|
||
check('墙钟、执行、等人三项都有数', ![wall, active, wait].includes('—'), `${wall} / ${active} / ${wait}`)
|
||
check('列表那一行的 title 分项写了三种时长',
|
||
/墙钟 .+ · 执行 .+ · 等人 .+/.test(await page.locator(`[data-run-id="${timed.id}"] [data-run-duration]`).getAttribute('title') ?? ''))
|
||
}
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 提取模板
|
||
|
||
await section('提取模板', async () => {
|
||
check('已完成的探索运行有「提取模板」', await page.locator('[data-action=extract]').count() === 1)
|
||
const wfs = await getJson('/workflows')
|
||
fakes.set('POST /api/copilot/from-run', () => ({
|
||
status: 200, json: { workflow_id: wfs[0].id, name: '检查用草稿', nodes: 3, edges: 2, dropped_nodes: 1, source_run: timed?.id },
|
||
}))
|
||
// 画布上还有没保存的改动（store 里的画布离开编排页也还在）：先问要不要放弃，再建草稿。
|
||
// 以前建完才问，点了「取消」库里就多出一张没人要的草稿（3C REQ-15）
|
||
const extractPosts = () => writes.filter((w) => w === 'POST /api/copilot/from-run').length
|
||
const discardAsk = page.getByRole('dialog').filter({ hasText: '未保存的改动' })
|
||
await page.evaluate(() => window.__studio.setState({ dirty: true,
|
||
workflow: { ...(window.__studio.getState().workflow ?? {}), id: 'fake0dirtycanvas', name: '没存的那张' } }))
|
||
const postsBefore = extractPosts()
|
||
await page.locator('[data-action=extract]').click()
|
||
const asked = await discardAsk.waitFor({ timeout: 3000 }).then(() => true, () => false)
|
||
check('画布有没保存的改动：先问要不要放弃，还没建草稿', asked && extractPosts() === postsBefore,
|
||
`${asked ? '问了' : '没问'} · 已发 ${extractPosts() - postsBefore} 次提取`)
|
||
await discardAsk.getByRole('button', { name: '取消' }).click().catch(() => {})
|
||
await page.waitForTimeout(400)
|
||
check('说了取消：不建草稿，留在记录页', extractPosts() === postsBefore && new URL(page.url()).pathname.startsWith('/runs'))
|
||
const countAsks = () => page.evaluate(() => {
|
||
window.__asks = 0
|
||
new MutationObserver(() => {
|
||
const d = [...document.querySelectorAll('[role=dialog]')].filter((e) => e.textContent?.includes('未保存的改动'))
|
||
if (d.length && !window.__askOpen) window.__asks += 1
|
||
window.__askOpen = d.length > 0
|
||
}).observe(document.body, { childList: true, subtree: true })
|
||
})
|
||
await countAsks()
|
||
await page.locator('[data-action=extract]').click()
|
||
await discardAsk.waitFor({ timeout: 3000 }).catch(() => {})
|
||
await discardAsk.getByRole('button', { name: '放弃并切换' }).click().catch(() => {})
|
||
await page.waitForURL(`**/studio/${wfs[0].id}`, { timeout: 5000 }).catch(() => {})
|
||
await page.waitForTimeout(400)
|
||
const asks = await page.evaluate(() => window.__asks ?? -1)
|
||
check('说了放弃：建一次草稿、跳过去，整条路只问这一遍', extractPosts() === postsBefore + 1 && asks === 1
|
||
&& new URL(page.url()).pathname === `/studio/${wfs[0].id}`, `提取 ${extractPosts() - postsBefore} 次 · 问了 ${asks} 遍`)
|
||
check('提取成功后跳到新草稿', new URL(page.url()).pathname === `/studio/${wfs[0].id}`)
|
||
fakes.delete('POST /api/copilot/from-run')
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 运行中：接流、停止、不能删
|
||
|
||
const FAKE = 'fake0running0000000000000000000'
|
||
let t0, liveRun, liveEvents
|
||
await section('运行中：实时接流、停止、不能删', async () => {
|
||
t0 = Date.now() / 1000 - 3
|
||
liveRun = {
|
||
...base, id: FAKE, status: 'running', output: {}, usage: {}, manifest_hash: null, manifest_seq: null,
|
||
created_at: new Date(t0 * 1000).toISOString(), started_at: new Date(t0 * 1000).toISOString(), finished_at: null,
|
||
}
|
||
const graph = { nodes: [
|
||
{ id: 'a', type: 'input', position: { x: 0, y: 0 }, data: { label: '输入', config: {} } },
|
||
{ id: 'b', type: 'llm', position: { x: 200, y: 0 }, data: { label: '总结', config: {} } },
|
||
], edges: [{ source: 'a', target: 'b' }] }
|
||
liveEvents = [
|
||
{ seq: 1, type: 'run.started', node_id: null, ts: t0, data: { nodes: 2 } },
|
||
{ seq: 2, type: 'node.started', node_id: 'a', ts: t0 + 0.1, data: {} },
|
||
{ seq: 3, type: 'node.finished', node_id: 'a', ts: t0 + 0.2, data: { duration_ms: 100 } },
|
||
{ seq: 4, type: 'node.started', node_id: 'b', ts: t0 + 0.3, data: {} },
|
||
]
|
||
let liveStatus = 'running'
|
||
// 停下之后重读到的是后端收尾过的那一份：带结束时间和用量
|
||
fakes.set(`GET /api/runs/${FAKE}`, () => ({
|
||
status: 200,
|
||
json: liveStatus === 'running' ? liveRun
|
||
: { ...liveRun, status: liveStatus, finished_at: new Date().toISOString(), usage: { wall_ms: 3000, active_ms: 3000, wait_ms: 0 } },
|
||
}))
|
||
fakes.set(`GET /api/runs/${FAKE}/events`, () => ({ status: 200, json: liveEvents }))
|
||
fakes.set(`GET /api/runs/${FAKE}/graph`, () => ({ status: 200, json: { graph, workflow_id: null, version: null } }))
|
||
fakes.set(`POST /api/runs/${FAKE}/cancel`, () => ({ status: 200, json: { ok: true } }))
|
||
// 左边列表里也放上这一条：跑完那一刻它要闪一下，而且闪完要摘掉
|
||
fakes.set('GET /api/runs', () => ({ status: 200, json: [{ ...liveRun, status: liveStatus }, ...listTop] }))
|
||
let socket = null
|
||
await page.routeWebSocket(new RegExp(`/api/runs/${FAKE}/stream`), (ws) => { socket = ws })
|
||
await page.goto(`${WEB}/runs/${FAKE}`, { waitUntil: 'domcontentloaded' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
await page.waitForTimeout(600)
|
||
check('运行中的记录接上了实时流', socket != null)
|
||
check('详情头有「停止」', await page.locator('[data-action=stop]').count() === 1)
|
||
const clockA = await page.locator('[data-telemetry=wall]').innerText()
|
||
await page.waitForTimeout(700)
|
||
const clockB = await page.locator('[data-telemetry=wall]').innerText()
|
||
check('墙钟在走（mm:ss.s）', /^\d\d:\d\d\.\d$/.test(clockB) && clockA !== clockB, `${clockA} → ${clockB}`)
|
||
check('状态格写着当前节点', (await page.locator('[data-run-telemetry]').innerText()).includes('当前「总结」'))
|
||
// 在跑的运行看航迹：游标跟着现在走，「此刻」列出在跑的节点
|
||
await page.locator('[data-run-detail] [role=tab][data-tab=trace]').click()
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const liveAtA = await page.locator('[data-trace-readout] [data-readout=at]').innerText().catch(() => '')
|
||
await page.waitForTimeout(500)
|
||
const liveAtB = await page.locator('[data-trace-readout] [data-readout=at]').innerText().catch(() => '')
|
||
const liveMode = await page.locator('[data-trace-readout]').getAttribute('data-mode').catch(() => '')
|
||
check('航迹上游标是实时的，而且在走', liveMode === '实时' && liveAtA !== liveAtB, `${liveMode} ${liveAtA} → ${liveAtB}`.replace(/\s+/g, ' '))
|
||
check('「此刻」列出在跑的「总结」', await page.locator('[data-trace-now] [data-now-node=b]').count() === 1)
|
||
await page.locator('[data-run-detail] [role=tab][data-tab=stream]').click()
|
||
await page.getByRole('button', { name: '更多操作' }).click()
|
||
const del = page.locator('[data-menu=delete]')
|
||
check('运行中「删除记录」不可点，并说明要先停止', await del.isDisabled() && (await del.innerText()).includes('先停止'))
|
||
await page.keyboard.press('Escape')
|
||
await page.locator('[data-action=stop]').click()
|
||
await page.waitForTimeout(300)
|
||
check('停止发的是 POST /cancel', writes.includes(`POST /api/runs/${FAKE}/cancel`))
|
||
// 后端的回应经实时流到达：节点收尾、运行取消、流结束
|
||
liveStatus = 'cancelled'
|
||
const t1 = Date.now() / 1000
|
||
socket?.send(JSON.stringify({ seq: 5, type: 'run.cancelled', node_id: null, ts: t1, data: { timing: { wall_ms: 3000, active_ms: 3000, wait_ms: 0 } } }))
|
||
// 流结束比取消事件晚一拍到（后端收尾完才发）：相位先变、那一行先改一次
|
||
await page.waitForTimeout(300)
|
||
socket?.send(JSON.stringify({ type: 'stream.end', status: 'cancelled', data: { status: 'cancelled' } }))
|
||
const flashRow = page.locator(`[data-runs-list] [data-run-id="${FAKE}"] .runs-row-changed`)
|
||
const flashed = await flashRow.waitFor({ state: 'attached', timeout: 1500 }).then(() => true, () => false)
|
||
await page.waitForTimeout(900)
|
||
check('流里的事件落进了时间线（状态变成已取消）', await page.locator('[data-run-detail]').getAttribute('data-run-code') === 'cancelled')
|
||
check('停下后「停止」消失', await page.locator('[data-action=stop]').count() === 0)
|
||
check('停下后不再转圈', await page.locator('[data-run-detail] .animate-spin').count() === 0)
|
||
// 相位一变先改一次那一行，紧接着流结束、重读运行又改一次（用量、结束时间）。
|
||
// 第二次改动不能把摘掉闪光的计时器清掉，否则这一行一直挂着，下次变状态也闪不起来
|
||
check('左边那一行状态变了闪一下', flashed)
|
||
await page.waitForTimeout(1600)
|
||
check('闪完就摘掉，不一直挂着', await flashRow.count() === 0)
|
||
fakes.delete('GET /api/runs')
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 等了很久之后接着跑
|
||
|
||
await section('等了几天的审批批掉之后：计时读得懂', async () => {
|
||
// 第一次开始在 8 天前，挂在审批上 8 天，刚被批掉、正接着跑。从第一次开始算的
|
||
// 秒表会读成「192:00:05.3」；墙钟要写跨度，执行和轮次头只数执行的部分
|
||
const LONG = 'fake0longwait00000000000000000'
|
||
const tl = Date.now() / 1000 - 8 * 86400 - 5
|
||
const tr = Date.now() / 1000 - 5
|
||
const longRun = {
|
||
...liveRun, id: LONG, created_at: new Date(tl * 1000).toISOString(), started_at: new Date(tl * 1000).toISOString(),
|
||
}
|
||
const longGraph = { nodes: [
|
||
{ id: 'a', type: 'input', position: { x: 0, y: 0 }, data: { label: '输入', config: {} } },
|
||
{ id: 'h', type: 'human', position: { x: 200, y: 0 }, data: { label: '人工把关', config: {} } },
|
||
{ id: 'b', type: 'llm', position: { x: 400, y: 0 }, data: { label: '总结', config: {} } },
|
||
], edges: [{ source: 'a', target: 'h' }, { source: 'h', target: 'b' }] }
|
||
const longEvents = [
|
||
{ seq: 1, type: 'run.started', node_id: null, ts: tl, data: { nodes: 3 } },
|
||
{ seq: 2, type: 'node.started', node_id: 'a', ts: tl + 0.1, data: {} },
|
||
{ seq: 3, type: 'node.finished', node_id: 'a', ts: tl + 0.2, data: { duration_ms: 100 } },
|
||
{ seq: 4, type: 'node.started', node_id: 'h', ts: tl + 0.3, data: {} },
|
||
{ seq: 5, type: 'human.requested', node_id: 'h', ts: tl + 0.4, data: { mode: 'approve', prompt: '放行吗？' } },
|
||
{ seq: 6, type: 'run.interrupted', node_id: null, ts: tl + 0.5, data: {} },
|
||
{ seq: 7, type: 'human.resolved', node_id: 'h', ts: tr, data: { response: { approved: true }, actor: '张工' } },
|
||
{ seq: 8, type: 'run.resumed', node_id: null, ts: tr, data: { actor: '张工' } },
|
||
{ seq: 9, type: 'node.finished', node_id: 'h', ts: tr + 0.1, data: { duration_ms: 1 } },
|
||
{ seq: 10, type: 'node.started', node_id: 'b', ts: tr + 0.2, data: {} },
|
||
]
|
||
fakes.set(`GET /api/runs/${LONG}`, () => ({ status: 200, json: longRun }))
|
||
fakes.set(`GET /api/runs/${LONG}/events`, () => ({ status: 200, json: longEvents }))
|
||
fakes.set(`GET /api/runs/${LONG}/graph`, () => ({ status: 200, json: { graph: longGraph, workflow_id: null, version: null } }))
|
||
fakes.set('GET /api/runs', () => ({ status: 200, json: [longRun, ...listTop] }))
|
||
let longSocket = null
|
||
await page.routeWebSocket(new RegExp(`/api/runs/${LONG}/stream`), (ws) => { longSocket = ws })
|
||
await page.goto(`${WEB}/runs/${LONG}`, { waitUntil: 'domcontentloaded' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
await page.waitForTimeout(800)
|
||
check('接上了实时流', longSocket != null)
|
||
const HMS = /\d+:\d\d:\d\d\.\d/
|
||
const longWall = await page.locator('[data-telemetry=wall]').innerText()
|
||
check('墙钟写跨度（8 天），不是秒表', /8 天/.test(longWall) && !HMS.test(longWall), longWall)
|
||
const activeA = await page.locator('[data-telemetry=active]').innerText()
|
||
await page.waitForTimeout(500)
|
||
const activeB = await page.locator('[data-telemetry=active]').innerText()
|
||
check('执行仍是走动的秒表，从批掉那一刻数起', /^00:0\d\.\d$/.test(activeB) && activeA !== activeB, `${activeA} → ${activeB}`)
|
||
const turnClock = await page.locator('[data-run-detail] > div span[title="已运行"]').first().innerText().catch(() => '')
|
||
check('轮次头的秒表只数执行的部分', /^00:0\d\.\d$/.test(turnClock), turnClock)
|
||
const rowClock = await page.locator(`[data-runs-list] [data-run-id="${LONG}"] [data-run-duration]`).innerText().catch(() => '')
|
||
check('列表那一行写「8 天」，不是秒表', /8 天/.test(rowClock) && !HMS.test(rowClock), rowClock)
|
||
fakes.delete('GET /api/runs')
|
||
fakes.delete(`GET /api/runs/${LONG}`)
|
||
fakes.delete(`GET /api/runs/${LONG}/events`)
|
||
fakes.delete(`GET /api/runs/${LONG}/graph`)
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 删除保护
|
||
|
||
await section('删除保护', async () => {
|
||
const FORMAL = 'fake0formal00000000000000000000'
|
||
const formalRun = { ...base, id: FORMAL, run_class: 'formal', version: 3, version_hash: 'f'.repeat(64) }
|
||
fakes.set(`GET /api/runs/${FORMAL}`, () => ({ status: 200, json: formalRun }))
|
||
fakes.set(`GET /api/runs/${FORMAL}/events`, () => ({ status: 200, json: liveEvents.slice(0, 3) }))
|
||
let deleteCalls = []
|
||
fakes.set(`DELETE /api/runs/${FORMAL}`, (url) => {
|
||
deleteCalls.push(url.search)
|
||
return url.searchParams.get('force') === 'true'
|
||
? { status: 204, body: '' }
|
||
: { status: 409, json: { detail: '这是一次已封存的正式运行，是出具结果的追溯凭证。删除后它的事件和工件会一并删掉，封存清单再也无法核对。确认要删的话请再确认一次（强制删除）' } }
|
||
})
|
||
await page.goto(`${WEB}/runs/${FORMAL}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
check('头部没有常驻的删除按钮', await page.locator('[data-run-detail] header button[title*="删除"]').count() === 0)
|
||
await page.getByRole('button', { name: '更多操作' }).click()
|
||
await page.locator('[data-menu=delete]').click()
|
||
const dialog = page.getByRole('dialog')
|
||
await dialog.waitFor()
|
||
check('确认框写清后果（清单无法再核对）', (await dialog.innerText()).includes('封存清单再也无法核对'))
|
||
await dialog.getByRole('button', { name: '删除记录' }).click()
|
||
await page.waitForTimeout(400)
|
||
const second = page.getByRole('dialog')
|
||
await second.waitFor()
|
||
check('后端 409 的 detail 显示在二次确认里', (await second.innerText()).includes('已封存的正式运行'))
|
||
const forceBtn = second.getByRole('button', { name: '强制删除' })
|
||
check('强制删除要照抄 id 才能点', await forceBtn.isDisabled())
|
||
await second.locator('input').fill(FORMAL.slice(0, 6))
|
||
await forceBtn.click()
|
||
await page.waitForURL((u) => u.pathname === '/runs', { timeout: 5000 }).catch(() => {})
|
||
check('先不带 force、确认后再带 force=true', deleteCalls.length === 2 && deleteCalls[0] === '' && deleteCalls[1] === '?force=true',
|
||
JSON.stringify(deleteCalls))
|
||
check('删掉后回到列表', new URL(page.url()).pathname === '/runs')
|
||
|
||
// 普通 409（比如后端说还在进行）：原话提示，不静默
|
||
const BUSY = 'fake0busy0000000000000000000000'
|
||
fakes.set(`GET /api/runs/${BUSY}`, () => ({ status: 200, json: { ...base, id: BUSY } }))
|
||
fakes.set(`GET /api/runs/${BUSY}/events`, () => ({ status: 200, json: liveEvents.slice(0, 3) }))
|
||
fakes.set(`DELETE /api/runs/${BUSY}`, () => ({ status: 409, json: { detail: '这次运行还在进行，现在删除会留下没人管的任务。先停止它，再删除' } }))
|
||
await page.goto(`${WEB}/runs/${BUSY}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
await page.getByRole('button', { name: '更多操作' }).click()
|
||
await page.locator('[data-menu=delete]').click()
|
||
await page.getByRole('dialog').getByRole('button', { name: '删除记录' }).click()
|
||
check('409 时把后端的话原样告诉人', await page.getByText('先停止它，再删除').first().waitFor({ timeout: 4000 }).then(() => true, () => false))
|
||
check('409 时停在原地', new URL(page.url()).pathname === `/runs/${BUSY}`)
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 航迹
|
||
|
||
const iso = (s) => new Date(s * 1000).toISOString()
|
||
const TRACE = 'fake0trace00000000000000000000'
|
||
const WAIT_S = 300
|
||
const traceGraph = { nodes: [
|
||
{ id: 'in', type: 'input', position: { x: 0, y: 0 }, data: { label: '输入', config: {} } },
|
||
{ id: 'query', type: 'agent', position: { x: 200, y: 0 }, data: { label: '查询订单', config: { tools: ['db_query__shop'] } } },
|
||
{ id: 'gate', type: 'human', position: { x: 400, y: 0 }, data: { label: '人工审批', config: {} } },
|
||
{ id: 'sum', type: 'llm', position: { x: 600, y: 0 }, data: { label: '汇总', config: {} } },
|
||
], edges: [{ source: 'in', target: 'query' }, { source: 'query', target: 'gate' }, { source: 'gate', target: 'sum' }] }
|
||
const traceEvents = (usageIn = 2000) => [
|
||
{ seq: 1, type: 'run.started', node_id: null, ts: tt, data: { nodes: 4 } },
|
||
{ seq: 2, type: 'node.started', node_id: 'in', ts: tt + 0.1, data: { node_type: 'input', label: '输入' } },
|
||
{ seq: 3, type: 'node.finished', node_id: 'in', ts: tt + 0.2, data: { duration_ms: 100 } },
|
||
{ seq: 4, type: 'node.started', node_id: 'query', ts: tt + 0.3, data: { node_type: 'agent', label: '查询订单' } },
|
||
{ seq: 5, type: 'tool.start', node_id: 'query', ts: tt + 0.5,
|
||
data: { tool: 'db_query__shop', call_id: 'c1', args: { sql: 'select count(*) as n from orders' } } },
|
||
{ seq: 6, type: 'tool.end', node_id: 'query', ts: tt + 2.5,
|
||
data: { tool: 'db_query__shop', call_id: 'c1', duration_ms: 2000, preview: '{"columns":["n"],"rows":[[42]]}' } },
|
||
{ seq: 7, type: 'llm.end', node_id: 'query', ts: tt + 3.0,
|
||
data: { agent: '查询订单', model: 'demo-model', input_tokens: 1200, output_tokens: 300, cost_usd: 0.004 } },
|
||
{ seq: 8, type: 'node.finished', node_id: 'query', ts: tt + 3.1, data: { duration_ms: 2800, preview: '共 42 单' } },
|
||
{ seq: 9, type: 'node.started', node_id: 'gate', ts: tt + 3.2, data: { node_type: 'human', label: '人工审批' } },
|
||
{ seq: 10, type: 'human.requested', node_id: 'gate', ts: tt + 3.3, data: { mode: 'approve', prompt: '放行吗？' } },
|
||
{ seq: 11, type: 'run.interrupted', node_id: null, ts: tt + 3.4, data: {} },
|
||
{ seq: 12, type: 'human.resolved', node_id: 'gate', ts: tt + 3.4 + WAIT_S, data: { response: { approved: true }, actor: '张工' } },
|
||
{ seq: 13, type: 'run.resumed', node_id: null, ts: tt + 3.4 + WAIT_S, data: { actor: '张工' } },
|
||
{ seq: 14, type: 'node.finished', node_id: 'gate', ts: tt + 3.5 + WAIT_S, data: { duration_ms: 1 } },
|
||
{ seq: 15, type: 'node.started', node_id: 'sum', ts: tt + 3.6 + WAIT_S, data: { node_type: 'llm', label: '汇总' } },
|
||
{ seq: 16, type: 'llm.end', node_id: 'sum', ts: tt + 6.0 + WAIT_S,
|
||
data: { model: 'demo-model', input_tokens: 800, output_tokens: 500, cost_usd: 0.003 } },
|
||
{ seq: 17, type: 'node.finished', node_id: 'sum', ts: tt + 6.1 + WAIT_S, data: { duration_ms: 2500 } },
|
||
{ seq: 18, type: 'run.finished', node_id: null, ts: tt + 6.2 + WAIT_S, data: {
|
||
output: { answer: '共 42 单' }, usage: { input_tokens: usageIn, output_tokens: 800, cost_usd: 0.007 },
|
||
timing: { wall_ms: (6.2 + WAIT_S) * 1000, active_ms: 6200, wait_ms: WAIT_S * 1000 } } },
|
||
]
|
||
const traceRun = (id, usageIn = 2000) => ({
|
||
...base, id, workflow_id: wfHost.id, workflow_name: wfHost.name, status: 'succeeded', run_class: 'exploratory',
|
||
version: null, version_hash: null, manifest_hash: null, manifest_seq: null, error: null, error_node_id: null,
|
||
input: { q: '上周的订单' }, output: { answer: '共 42 单' },
|
||
usage: { input_tokens: usageIn, output_tokens: 800, cost_usd: 0.007, duration_ms: 6200,
|
||
wall_ms: (6.2 + WAIT_S) * 1000, active_ms: 6200, wait_ms: WAIT_S * 1000 },
|
||
created_at: iso(tt), started_at: iso(tt), finished_at: iso(tt + 6.2 + WAIT_S),
|
||
})
|
||
const viewTab = (k) => page.locator(`[data-run-detail] [role=tab][data-tab=${k}]`)
|
||
const readout = (k) => page.locator(`[data-trace-readout] [data-readout=${k}]`).innerText().catch(() => '')
|
||
// 实时、回放、终态写在游标那一格的标签行，数值那一行只有时刻
|
||
const mode = () => page.locator('[data-trace-readout]').getAttribute('data-mode').catch(() => '')
|
||
let tt, ART_Q
|
||
await section('航迹：按时间摊开，拖到哪一刻读到哪一刻', async () => {
|
||
// 一次等过 5 分钟审批的运行：查询 → 审批 → 汇总。名字都是编的通用示例
|
||
const TRACE_OFF = 'fake0traceoff00000000000000000'
|
||
tt = Date.now() / 1000 - 3600
|
||
ART_Q = 'a1'.repeat(32)
|
||
const ART_QOUT = 'b2'.repeat(32)
|
||
const ART_SUM = 'c3'.repeat(32)
|
||
const traceArtifacts = [
|
||
{ id: ART_Q, kind: 'query_snapshot', node_id: 'query', size: 2048, meta: {}, created_at: iso(tt + 2.5) },
|
||
{ id: ART_QOUT, kind: 'node_output', node_id: 'query', size: 120, meta: { type: 'agent', attempt: 1 }, created_at: iso(tt + 3.1) },
|
||
{ id: ART_SUM, kind: 'node_output', node_id: 'sum', size: 300, meta: { type: 'llm', attempt: 1 }, created_at: iso(tt + 6.1 + WAIT_S) },
|
||
]
|
||
for (const [id, usageIn] of [[TRACE, 2000], [TRACE_OFF, 5000]]) {
|
||
fakes.set(`GET /api/runs/${id}`, () => ({ status: 200, json: traceRun(id, usageIn) }))
|
||
fakes.set(`GET /api/runs/${id}/events`, () => ({ status: 200, json: traceEvents(usageIn) }))
|
||
fakes.set(`GET /api/runs/${id}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${id}/artifacts`, () => ({ status: 200, json: traceArtifacts }))
|
||
}
|
||
fakes.set(`GET /api/artifacts/${ART_Q}`, () => ({ status: 200, json: { id: ART_Q, content: {
|
||
tool: 'db_query__shop', args: { sql: 'select count(*) as n from orders' }, result: '{"columns":["n"],"rows":[[42]]}',
|
||
} } }))
|
||
// 工作流「现在」的图：这些运行之后改过结构——「汇总」删了，换成「通知」；「查询订单」还在。
|
||
// 画布上还对得准的节点给「在画布中看这一步」，已经没了的不给（给了也对不到任何东西）
|
||
const wfNow = (await getJson('/workflows')).map((w) => (w.id !== wfHost.id ? w : { ...w, graph: {
|
||
nodes: [...traceGraph.nodes.filter((n) => n.id !== 'sum'),
|
||
{ id: 'notify', type: 'output', position: { x: 600, y: 0 }, data: { label: '通知', config: {} } }],
|
||
edges: [...traceGraph.edges.filter((e) => e.target !== 'sum'), { source: 'gate', target: 'notify' }],
|
||
} }))
|
||
fakes.set('GET /api/workflows', () => ({ status: 200, json: wfNow }))
|
||
|
||
await page.goto(`${WEB}/runs/${TRACE}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
check('详情分「时间线 / 航迹 / 工件」三个页签',
|
||
await viewTab('stream').count() === 1 && await viewTab('trace').count() === 1 && await viewTab('artifacts').count() === 1)
|
||
check('默认停在时间线', await viewTab('stream').getAttribute('aria-selected').catch(() => null) === 'true')
|
||
check('工件页签上写着有几件', (await viewTab('artifacts').innerText().catch(() => '')).includes('3'))
|
||
check('读屏念的是「3 件」，不是「3 条」',
|
||
await viewTab('artifacts').locator('[aria-label]').getAttribute('aria-label').catch(() => null) === '3 件',
|
||
await viewTab('artifacts').locator('[aria-label]').getAttribute('aria-label').catch(() => '') ?? '')
|
||
await viewTab('trace').click().catch(() => {})
|
||
await page.locator('[data-run-trace] section[aria-label="航迹"]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('点「航迹」地址记下 ?view=trace', new URL(page.url()).searchParams.get('view') === 'trace')
|
||
const lanes = await page.locator('[data-run-trace] [data-lane]').evaluateAll((els) => els.map((e) => e.getAttribute('data-lane')))
|
||
check('每个节点一条泳道，按执行顺序排', lanes.join(',') === 'in,query,gate,sum', lanes.join(',') || '没有泳道')
|
||
check('没拖游标时读的是终态：已完成、2.8k tok',
|
||
(await readout('phase')).includes('已完成') && (await readout('tokens')).includes('2.8k'),
|
||
`${await readout('phase')} / ${await readout('tokens')}`)
|
||
check('没选节点时列出最耗时的节点（慢在哪）',
|
||
(await page.locator('[data-trace-slowest] [data-slow-node]').first().getAttribute('data-slow-node').catch(() => null)) === 'query')
|
||
|
||
// 地址里带着时刻：从工件、分享的链接直接落到那一刻
|
||
await page.goto(`${WEB}/runs/${TRACE}?view=trace&at=2500`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('?at=2500 落到 T+00:02.5', (await readout('at')).includes('00:02.5'), await readout('at'))
|
||
check('游标在时间轴上也在回放', (await page.locator('[data-run-trace] [role=slider]').getAttribute('aria-valuenow').catch(() => null)) === '2500')
|
||
check('那一刻在跑的是「查询订单」', await page.locator('[data-trace-now] [data-now-node=query]').count() === 1)
|
||
check('那一刻整次运行还没用 token（模型 3.0 s 才回）', /^0\b/.test((await readout('tokens')).trim()), await readout('tokens'))
|
||
check('进来之后地址里的时刻摘掉（拖动时不再和它对不上）', !new URL(page.url()).searchParams.has('at'))
|
||
|
||
// 慢在哪：那一刻卡在哪个工具上（查询 0.5 s 开始、2.5 s 返回）
|
||
await page.goto(`${WEB}/runs/${TRACE}?view=trace&at=2000`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
await page.locator('[data-run-trace] [data-lane=query] .tl-label').click().catch(() => {})
|
||
const callText = await page.locator('[data-trace-node=query] [data-node-field=call]').innerText().catch(() => '')
|
||
check('那一刻在跑的节点，卡片写着正在调哪个工具、调了多久', /db_query__shop.*已 1\.5 s/.test(callText), callText || '没有这一行')
|
||
check('点泳道名只是选中节点，游标不动', (await readout('at')).includes('00:02.0'), await readout('at'))
|
||
|
||
// 拖动：在坞的刻度行上按下、拖过去，读数跟着游标走
|
||
const track = page.locator('[data-run-trace] .tl-scrub').first()
|
||
const box = await track.boundingBox().catch(() => null)
|
||
if (box) {
|
||
await page.mouse.move(box.x + box.width * 0.05, box.y + box.height / 2)
|
||
await page.mouse.down()
|
||
await page.mouse.move(box.x + box.width * 0.15, box.y + box.height / 2, { steps: 4 })
|
||
await page.waitForTimeout(120)
|
||
const mid = `${await mode()} ${await readout('at')}`
|
||
await page.mouse.move(box.x + box.width * 0.3, box.y + box.height / 2, { steps: 4 })
|
||
await page.mouse.up()
|
||
await page.waitForTimeout(150)
|
||
const after = `${await mode()} ${await readout('at')}`
|
||
check('拖动游标：读数跟着走，并标成回放', mid.includes('回放') && after.includes('回放') && mid !== after, `${mid} → ${after}`)
|
||
} else {
|
||
check('拖动游标：读数跟着走，并标成回放', false, '找不到坞的刻度行')
|
||
}
|
||
const slider = page.locator('[data-run-trace] [role=slider]')
|
||
await slider.focus().catch(() => {})
|
||
await page.keyboard.press('Home')
|
||
await page.waitForTimeout(100)
|
||
check('键盘 Home：游标回到开始', (await readout('at')).includes('00:00.0'), await readout('at'))
|
||
await page.keyboard.press('End')
|
||
await page.waitForTimeout(100)
|
||
check('键盘 End：回到终态读数', await mode() === '终态', await mode())
|
||
|
||
// 关键时刻：长时间等人的空档被压缩了，拖游标很难正好停在那一下
|
||
const moments = page.locator('[data-trace-moments] [data-moment]')
|
||
const momentText = (await moments.allInnerTexts().catch(() => [])).map((t) => t.replace(/\s+/g, ' '))
|
||
check('列出关键时刻：开始、停下等审批、审批已处理（等了多久）、结局',
|
||
momentText.length === 4 && momentText[0].includes('开始运行') && momentText[1].includes('「人工审批」停下等审批')
|
||
&& momentText[2].includes('审批已处理') && momentText[2].includes('5 分 00 秒') && momentText[3].includes('运行完成'),
|
||
momentText.join(' | '))
|
||
check('没拖游标时，当前落在结局那一条', await moments.nth(3).getAttribute('aria-current').catch(() => null) === 'step')
|
||
await moments.nth(2).click().catch(() => {})
|
||
await page.waitForTimeout(150)
|
||
check('点「审批已处理」：游标跳到那一刻（T+05:03.4）', await mode() === '回放' && (await readout('at')).includes('05:03.4'),
|
||
`${await mode()} ${await readout('at')}`)
|
||
check('跳过去之后它成了当前那一条', await moments.nth(2).getAttribute('aria-current').catch(() => null) === 'step')
|
||
check('坞上的游标也跟着过去', (await slider.getAttribute('aria-valuenow').catch(() => null)) === '303400',
|
||
await slider.getAttribute('aria-valuenow').catch(() => '') ?? '')
|
||
await moments.nth(3).click().catch(() => {})
|
||
await page.waitForTimeout(150)
|
||
check('点结局那一条回到终态', await mode() === '终态', await mode())
|
||
|
||
await page.goto(`${WEB}/runs/${TRACE}?view=trace&at=30000`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('拖到等审批那一段：状态是等待审批', (await readout('phase')).includes('等待审批'), await readout('phase'))
|
||
check('那一刻等审批的是「人工审批」', await page.locator('[data-trace-now] [data-now-node=gate]').count() === 1)
|
||
check('用量只算到那一刻：1.5k', (await readout('tokens')).includes('1.5k'), await readout('tokens'))
|
||
await page.locator('[data-run-trace] [data-lane=query]').click().catch(() => {})
|
||
const nodeCard = page.locator('[data-trace-node=query]')
|
||
check('点泳道看这个节点在那一刻的样子', await nodeCard.count() === 1)
|
||
check('节点的用量、工具数取自那一刻',
|
||
(await nodeCard.locator('[data-node-field=tokens]').innerText().catch(() => '')).includes('1.5k')
|
||
&& (await nodeCard.locator('[data-node-field=tools]').innerText().catch(() => '')).includes('1'))
|
||
check('节点卡能回画布看这一步',
|
||
(await nodeCard.locator('[data-action=node-canvas]').getAttribute('href').catch(() => null)) === `/studio/${wfHost.id}?run=${TRACE}&focus=query`)
|
||
await page.locator('[data-run-trace] [data-lane=sum] .tl-label').click().catch(() => {})
|
||
const goneCard = page.locator('[data-trace-node=sum]')
|
||
check('工作流现在的图里已经没有的节点：节点卡不给落空的「在画布中看这一步」，说明为什么',
|
||
await goneCard.count() === 1 && await goneCard.locator('[data-action=node-canvas]').count() === 0
|
||
&& await goneCard.locator('[data-node-gone]').count() === 1)
|
||
await page.locator('[data-run-trace] [data-lane=query] .tl-label').click().catch(() => {})
|
||
await nodeCard.locator('[data-action=node-stream]').click().catch(() => {})
|
||
await page.waitForTimeout(300)
|
||
check('「在时间线里看」切回时间线', await viewTab('stream').getAttribute('aria-selected').catch(() => null) === 'true')
|
||
check('并且把那一步描出来', await page.locator('[data-run-detail] [data-node-id="query"][data-flash]').count() >= 1)
|
||
|
||
await page.goto(`${WEB}/runs/${TRACE_OFF}?view=trace&at=30000`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('各次调用加起来对不上后端总数时，那一刻的用量写「—」，不拿终值冒充', (await readout('tokens')).trim().startsWith('—'), await readout('tokens'))
|
||
})
|
||
|
||
// 模型把工具调用写成了文字、一次都没真正查（引擎判失败）：结局是失败，而且说得出为什么
|
||
await section('航迹：模型没有真正调用工具', async () => {
|
||
const LEAK = 'fake0leak000000000000000000000'
|
||
const LEAK_ERROR = '模型输出了工具调用的原始标记，但没有真正调用工具，这一步一次都没查到数据。常见原因：节点没有绑定工具，或者模型、服务不支持工具调用。到画布里给这个节点绑定要用的工具；绑定了还这样，就换一个支持工具调用的模型'
|
||
fakes.set(`GET /api/runs/${LEAK}`, () => ({ status: 200, json: {
|
||
...traceRun(LEAK), status: 'failed', output: null, error: LEAK_ERROR, error_node_id: 'query',
|
||
usage: { input_tokens: 900, output_tokens: 400, cost_usd: 0.002, duration_ms: 4200, wall_ms: 4200, active_ms: 4200, wait_ms: 0 },
|
||
finished_at: iso(tt + 4.2),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${LEAK}/events`, () => ({ status: 200, json: [
|
||
...traceEvents().slice(0, 4),
|
||
{ seq: 5, type: 'llm.end', node_id: 'query', ts: tt + 2.0,
|
||
data: { agent: '查询订单', model: 'demo-model', input_tokens: 450, output_tokens: 200, cost_usd: 0.001 } },
|
||
{ seq: 6, type: 'log', node_id: 'query', ts: tt + 2.1, data: {
|
||
level: 'warn', code: 'tool_markup_leak', message: '模型把工具调用写成了文字（<｜｜DSML｜｜invoke name="db_query__shop"…），没有真正调用工具' } },
|
||
{ seq: 7, type: 'llm.end', node_id: 'query', ts: tt + 4.0,
|
||
data: { agent: '查询订单', model: 'demo-model', input_tokens: 450, output_tokens: 200, cost_usd: 0.001 } },
|
||
{ seq: 8, type: 'node.failed', node_id: 'query', ts: tt + 4.1, data: { error: LEAK_ERROR, duration_ms: 3800 } },
|
||
{ seq: 9, type: 'run.failed', node_id: null, ts: tt + 4.2, data: {
|
||
error: LEAK_ERROR, node_id: 'query', timing: { wall_ms: 4200, active_ms: 4200, wait_ms: 0 } } },
|
||
] }))
|
||
fakes.set(`GET /api/runs/${LEAK}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${LEAK}/artifacts`, () => ({ status: 200, json: [] }))
|
||
await page.goto(`${WEB}/runs/${LEAK}?view=trace`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const leakBanner = (await page.locator('[data-run-banner=failed]').innerText().catch(() => '')).replace(/\s+/g, ' ')
|
||
check('失败横幅说清是模型没有真正调用工具', leakBanner.includes('没有真正调用工具'), leakBanner.slice(0, 60))
|
||
const leakLocate = page.locator('[data-run-banner=failed] [data-action=locate]')
|
||
check('失败的节点还在工作流现在的图里：「在画布中定位」对准它；接着跑过不去，它就是主按钮',
|
||
await leakLocate.getAttribute('href').catch(() => null) === `/studio/${wfHost.id}?run=${LEAK}&focus=query`
|
||
&& /\bbtn-primary\b/.test(await leakLocate.getAttribute('class').catch(() => '') ?? '')
|
||
&& await page.locator('[data-run-banner=failed] [data-action=locate-trace]').count() === 0)
|
||
const leakMoments = (await page.locator('[data-trace-moments] [data-moment]').allInnerTexts().catch(() => [])).map((t) => t.replace(/\s+/g, ' '))
|
||
check('关键时刻里有那一下警告，结局写失败于哪个节点',
|
||
leakMoments.some((t) => t.includes('「查询订单」把工具调用写成了文字'))
|
||
&& (leakMoments.at(-1) ?? '').includes('失败于「查询订单」') && (leakMoments.at(-1) ?? '').includes('没有真正调用工具'),
|
||
leakMoments.join(' | '))
|
||
const leakCard = (await page.locator('[data-trace-node=query]').innerText().catch(() => '')).replace(/\s+/g, ' ')
|
||
check('失败的节点默认选中，卡片上写着警告和原因',
|
||
leakCard.includes('把工具调用写成了文字') && leakCard.includes('没有真正调用工具') && leakCard.includes('失败'),
|
||
leakCard.slice(0, 80))
|
||
await page.locator('[data-trace-moments] [data-moment="query:markup"]').click().catch(() => {})
|
||
await page.waitForTimeout(150)
|
||
check('跳到警告那一刻：节点还在跑，卡片上已经有警告',
|
||
(await readout('at')).includes('00:02.1') && (await page.locator('[data-trace-node=query] [data-node-warn]').count()) === 1,
|
||
await readout('at'))
|
||
})
|
||
|
||
// 工具库里的参数定义写坏了：要改的东西不在运行快照里，先去改、再接着跑。以前「接着跑」是主按钮，
|
||
// 人先点它，同样的错再来一遍；「去工具库」只到列表，还得自己找是哪一个（3C REQ-1 / REQ-5）
|
||
await section('失败：自定义工具的参数定义写坏了，先去改', async () => {
|
||
const BROKEN = 'fake0brokentool000000000000000'
|
||
const BROKEN_ERROR = '自定义工具「lookup_order」的参数定义格式不对：参数 store 要写成 {"type": "string"} 这样的对象，不能直接写 "string"。到「工具」页把它的参数定义改好再运行'
|
||
+ '；自定义工具「fetch_rate」的参数定义格式不对：类型「int」认不出来，是不是想写 integer；只能是 string、number、integer、boolean、array、object。到「工具」页把它的参数定义改好再运行'
|
||
fakes.set(`GET /api/runs/${BROKEN}`, () => ({ status: 200, json: {
|
||
...traceRun(BROKEN), status: 'failed', output: null, error: BROKEN_ERROR, error_node_id: 'query',
|
||
usage: { input_tokens: 0, output_tokens: 0, cost_usd: 0, duration_ms: 400, wall_ms: 400, active_ms: 400, wait_ms: 0 },
|
||
finished_at: iso(tt + 0.4),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${BROKEN}/events`, () => ({ status: 200, json: [
|
||
...traceEvents().slice(0, 4),
|
||
{ seq: 5, type: 'node.failed', node_id: 'query', ts: tt + 0.35, data: { error: BROKEN_ERROR, duration_ms: 50 } },
|
||
{ seq: 6, type: 'run.failed', node_id: null, ts: tt + 0.4, data: {
|
||
error: BROKEN_ERROR, node_id: 'query', timing: { wall_ms: 400, active_ms: 400, wait_ms: 0 } } },
|
||
] }))
|
||
fakes.set(`GET /api/runs/${BROKEN}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${BROKEN}/artifacts`, () => ({ status: 200, json: [] }))
|
||
await page.goto(`${WEB}/runs/${BROKEN}?view=stream`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const brokenFix = page.locator('[data-run-banner=failed] [data-action=tools]')
|
||
const brokenGo = page.locator('[data-run-banner=failed] [data-action=continue]')
|
||
check('标题说有几个工具坏了，不只认第一个',
|
||
(await page.locator('[data-failed-title]').innerText().catch(() => '')).trim() === '2 个自定义工具的参数定义写坏了')
|
||
check('主按钮是「去改参数定义」，直达第一个坏工具的编辑框',
|
||
(await brokenFix.innerText().catch(() => '')).includes('去改参数定义')
|
||
&& /\bbtn-primary\b/.test(await brokenFix.getAttribute('class').catch(() => '') ?? '')
|
||
&& await brokenFix.getAttribute('href').catch(() => null) === '/tools/custom?edit=lookup_order',
|
||
await brokenFix.getAttribute('href').catch(() => '没有这个按钮') ?? '')
|
||
check('「接着跑」还在（改好之后接着跑能过），但退成次要、排在后面',
|
||
await brokenGo.count() === 1 && !/\bbtn-primary\b/.test(await brokenGo.getAttribute('class').catch(() => '') ?? '')
|
||
&& await page.evaluate(() => {
|
||
const fix = document.querySelector('[data-run-banner=failed] [data-action=tools]')
|
||
const go = document.querySelector('[data-run-banner=failed] [data-action=continue]')
|
||
return !!fix && !!go && !!(fix.compareDocumentPosition(go) & Node.DOCUMENT_POSITION_FOLLOWING)
|
||
}))
|
||
const streamFix = page.locator('[data-view-pane=stream] [data-turn-error] [data-fix=tools]')
|
||
check('时间线里的报错也直达那个工具，写的是「去改参数定义」',
|
||
await streamFix.getAttribute('href').catch(() => null) === '/tools/custom?edit=lookup_order'
|
||
&& (await streamFix.innerText().catch(() => '')).includes('去改参数定义'),
|
||
await streamFix.getAttribute('href').catch(() => '没有这个入口') ?? '')
|
||
await brokenFix.click().catch(() => {})
|
||
await page.waitForURL((u) => u.pathname === '/tools/custom', { timeout: 5000 }).catch(() => {})
|
||
check('点了打开工具页的自定义工具', new URL(page.url()).pathname === '/tools/custom')
|
||
|
||
// 归不了类的失败：标题就是原话。时间线里的报错不再在「技术细节」里把同一句重复一遍（3C REQ-25）
|
||
const PLAIN = 'fake0plainfail0000000000000000'
|
||
const PLAIN_ERROR = '汇总节点交回的内容是空的'
|
||
fakes.set(`GET /api/runs/${PLAIN}`, () => ({ status: 200, json: {
|
||
...traceRun(PLAIN), status: 'failed', output: null, error: PLAIN_ERROR, error_node_id: 'query', finished_at: iso(tt + 0.4),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${PLAIN}/events`, () => ({ status: 200, json: [
|
||
...traceEvents().slice(0, 4),
|
||
{ seq: 5, type: 'node.failed', node_id: 'query', ts: tt + 0.35, data: { error: PLAIN_ERROR, duration_ms: 50 } },
|
||
{ seq: 6, type: 'run.failed', node_id: null, ts: tt + 0.4, data: { error: PLAIN_ERROR, node_id: 'query', timing: { wall_ms: 400, active_ms: 400, wait_ms: 0 } } },
|
||
] }))
|
||
fakes.set(`GET /api/runs/${PLAIN}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${PLAIN}/artifacts`, () => ({ status: 200, json: [] }))
|
||
await page.goto(`${WEB}/runs/${PLAIN}?view=stream`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-view-pane=stream] [data-turn-error]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const plainErr = page.locator('[data-view-pane=stream] [data-turn-error]')
|
||
check('原话就是标题时，时间线的报错不再收一份一模一样的技术细节',
|
||
(await plainErr.innerText().catch(() => '')).includes(PLAIN_ERROR) && await plainErr.locator('details').count() === 0,
|
||
`${await plainErr.locator('details').count()} 个技术细节`)
|
||
for (const k of ['', '/events', '/graph', '/artifacts']) fakes.delete(`GET /api/runs/${PLAIN}${k}`)
|
||
})
|
||
|
||
// 等审批时实时流断了，重连上来后端回 stream.end{interrupted}；这一刻审批正好在别处批掉、
|
||
// 运行还没改状态（后端先记审批、再改运行）。以前流收尾时运行和审批分两头查，拼出
|
||
// 「interrupted、没有审批」就判成已挂起，而且再没人重查，一直挂着「可续跑」（3C REQ-3）
|
||
const GAP = 'fake0gapstream0000000000000000'
|
||
let gapApproval
|
||
await section('等审批时流断了又重连，撞上审批刚批掉的空档', async () => {
|
||
let gapPhase = 'live'
|
||
let gapReads = 0
|
||
const gapSockets = []
|
||
fakes.set(`GET /api/runs/${GAP}`, () => ({ status: 200, json: {
|
||
...traceRun(GAP), status: gapPhase === 'live' ? 'running' : gapReads++ === 0 ? 'interrupted' : 'running',
|
||
output: null, finished_at: null,
|
||
} }))
|
||
fakes.set(`GET /api/runs/${GAP}/events`, () => ({ status: 200, json: traceEvents().slice(0, gapPhase === 'live' ? 9 : 11) }))
|
||
fakes.set(`GET /api/runs/${GAP}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${GAP}/artifacts`, () => ({ status: 200, json: [] }))
|
||
gapApproval = { id: 'fake0gapapproval', run_id: GAP, node_id: 'gate', status: 'pending', mode: 'approve',
|
||
prompt: '放行吗？', created_at: iso(tt + 3.3), workflow_id: wfHost.id, workflow_name: '订单日报', node_label: '人工审批' }
|
||
fakes.set('GET /api/approvals', (url) => ({ status: 200, json: gapPhase === 'live'
|
||
&& (!url.searchParams.get('run_id') || url.searchParams.get('run_id') === GAP) ? [gapApproval] : [] }))
|
||
await page.routeWebSocket(new RegExp(`/api/runs/${GAP}/stream`), (ws) => {
|
||
gapSockets.push(ws)
|
||
// 第二条连接：重连上来，后端看运行还是 interrupted，按协议回结束标记
|
||
if (gapSockets.length === 2) ws.send(JSON.stringify({ type: 'stream.end', status: 'interrupted', data: { status: 'interrupted' } }))
|
||
// 再往后是确认它在跑之后接回来的：补上别处批掉之后的事件
|
||
if (gapSockets.length >= 3) {
|
||
const t = Date.now() / 1000
|
||
ws.send(JSON.stringify({ seq: 12, type: 'human.resolved', node_id: 'gate', ts: t, data: { response: { approved: true }, actor: '张工' } }))
|
||
ws.send(JSON.stringify({ seq: 13, type: 'run.resumed', node_id: null, ts: t, data: { actor: '张工' } }))
|
||
}
|
||
})
|
||
await page.goto(`${WEB}/runs/${GAP}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail][data-run-code=running]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const gapT = Date.now() / 1000
|
||
gapSockets[0]?.send(JSON.stringify({ seq: 10, type: 'human.requested', node_id: 'gate', ts: gapT, data: { mode: 'approve', prompt: '放行吗？' } }))
|
||
gapSockets[0]?.send(JSON.stringify({ seq: 11, type: 'run.interrupted', node_id: null, ts: gapT, data: {} }))
|
||
await page.locator('[data-run-detail][data-run-code=waiting]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
await recordCodes()
|
||
gapPhase = 'gap'
|
||
await gapSockets[0]?.close()
|
||
const gapBack = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'running', null, { timeout: 9000 },
|
||
).then(() => true, () => false)
|
||
const gapCodes = await recordedCodes()
|
||
check('空档里没有判成「已挂起」', !gapCodes.includes('held'), gapCodes.join(' → '))
|
||
check('再看一次发现在跑：状态回到运行中，接回实时流', gapBack && gapSockets.length >= 3, `${gapSockets.length} 条连接`)
|
||
for (const k of ['', '/events', '/graph', '/artifacts']) fakes.delete(`GET /api/runs/${GAP}${k}`)
|
||
fakes.delete('GET /api/approvals')
|
||
})
|
||
|
||
// 同一个空档，但别处批掉之后运行转眼就跑完了：再看一次已经是 succeeded。流停在审批上，
|
||
// 之后的事件这里一条也没收到，只把头上换成已完成的话，时间线永远停在审批卡上：没有
|
||
// 「放行」、没有汇总那一步、没有收尾（3C 返工 D1）
|
||
await section('等审批时流断了又重连，空档之后运行已经跑完', async () => {
|
||
const GAPEND = 'fake0gapfinish0000000000000000'
|
||
let gapEndPhase = 'live'
|
||
let gapEndReads = 0
|
||
const gapEndSockets = []
|
||
fakes.set(`GET /api/runs/${GAPEND}`, () => {
|
||
if (gapEndPhase === 'live') return { status: 200, json: { ...traceRun(GAPEND), status: 'running', output: null, finished_at: null } }
|
||
return { status: 200, json: gapEndReads++ === 0
|
||
? { ...traceRun(GAPEND), status: 'interrupted', output: null, finished_at: null }
|
||
: traceRun(GAPEND) }
|
||
})
|
||
fakes.set(`GET /api/runs/${GAPEND}/events`, () => ({ status: 200, json: gapEndPhase === 'live' ? traceEvents().slice(0, 9) : traceEvents() }))
|
||
fakes.set(`GET /api/runs/${GAPEND}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${GAPEND}/artifacts`, () => ({ status: 200, json: [] }))
|
||
const gapEndApproval = { ...gapApproval, id: 'fake0gapendapproval', run_id: GAPEND }
|
||
fakes.set('GET /api/approvals', (url) => ({ status: 200, json: gapEndPhase === 'live'
|
||
&& (!url.searchParams.get('run_id') || url.searchParams.get('run_id') === GAPEND) ? [gapEndApproval] : [] }))
|
||
await page.routeWebSocket(new RegExp(`/api/runs/${GAPEND}/stream`), (ws) => {
|
||
gapEndSockets.push(ws)
|
||
if (gapEndSockets.length === 2) ws.send(JSON.stringify({ type: 'stream.end', status: 'interrupted', data: { status: 'interrupted' } }))
|
||
})
|
||
await page.goto(`${WEB}/runs/${GAPEND}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail][data-run-code=running]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const gapEndT = Date.now() / 1000
|
||
gapEndSockets[0]?.send(JSON.stringify({ seq: 10, type: 'human.requested', node_id: 'gate', ts: gapEndT, data: { mode: 'approve', prompt: '放行吗？' } }))
|
||
gapEndSockets[0]?.send(JSON.stringify({ seq: 11, type: 'run.interrupted', node_id: null, ts: gapEndT, data: {} }))
|
||
await page.locator('[data-run-detail][data-run-code=waiting]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
await recordCodes()
|
||
gapEndPhase = 'gap'
|
||
await gapEndSockets[0]?.close()
|
||
const gapEndDone = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'succeeded', null, { timeout: 9000 },
|
||
).then(() => true, () => false)
|
||
const gapEndSum = page.locator('[data-view-pane=stream] [data-step-status][data-node-id=sum]')
|
||
await gapEndSum.first().waitFor({ timeout: 4000 }).catch(() => {})
|
||
const gapEndCodes = await recordedCodes()
|
||
const gapEndCount = Number(((await page.locator('[data-run-detail] > header').innerText().catch(() => ''))
|
||
.match(/([\d,]+) 条事件/)?.[1] ?? '0').replace(/,/g, ''))
|
||
check('空档之后已经跑完：状态落到已完成，中间没有判成「已挂起」', gapEndDone && !gapEndCodes.includes('held'), gapEndCodes.join(' → '))
|
||
check('时间线补上了审批之后的事：汇总那一步在', await gapEndSum.count() > 0, `${await gapEndSum.count()} 行`)
|
||
check('事件整条补齐，条数和后端一致', gapEndCount === traceEvents().length, `${gapEndCount} / ${traceEvents().length} 条`)
|
||
for (const k of ['', '/events', '/graph', '/artifacts']) fakes.delete(`GET /api/runs/${GAPEND}${k}`)
|
||
fakes.delete('GET /api/approvals')
|
||
})
|
||
|
||
// 同一个节点执行了三次：第一次写成文字被提醒、重答了；第二次收尾轮还想调工具；第三次干干净净。
|
||
// 节点卡片说的是游标那一刻所在的那一次，别把上一次的事挂到这一次上，也别因为后面还有一件就看不到这一次的
|
||
await section('航迹：节点卡片按这一次执行说事（3C REQ-13）', async () => {
|
||
const REEXEC = 'fake0reexec0000000000000000000'
|
||
fakes.set(`GET /api/runs/${REEXEC}`, () => ({ status: 200, json: {
|
||
...traceRun(REEXEC), output: { answer: '共 42 单' },
|
||
usage: { input_tokens: 900, output_tokens: 400, cost_usd: 0.002, duration_ms: 3200, wall_ms: 3200, active_ms: 3200, wait_ms: 0 },
|
||
finished_at: iso(tt + 3.2),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${REEXEC}/events`, () => ({ status: 200, json: [
|
||
...traceEvents().slice(0, 4),
|
||
{ seq: 5, type: 'log', node_id: 'query', ts: tt + 1.0, data: {
|
||
level: 'warn', code: 'tool_markup_leak', message: '查询订单把工具调用写成了文字（<｜｜DSML｜｜invoke name="db_query__shop"…），没有真正调用工具，已提醒它重试一次' } },
|
||
{ seq: 6, type: 'node.finished', node_id: 'query', ts: tt + 1.5, data: { duration_ms: 1200, preview: '共 40 单' } },
|
||
{ seq: 7, type: 'node.started', node_id: 'query', ts: tt + 2.0, data: { node_type: 'agent', label: '查询订单' } },
|
||
{ seq: 8, type: 'log', node_id: 'query', ts: tt + 2.5, data: {
|
||
level: 'warn', code: 'tool_markup_leak', message: '查询订单收尾轮仍想调用工具（<｜｜DSML｜｜invoke name="db_query__shop"…），交出前面写的内容' } },
|
||
{ seq: 9, type: 'node.finished', node_id: 'query', ts: tt + 3.0, data: { duration_ms: 1000, preview: '共 41 单' } },
|
||
{ seq: 10, type: 'node.started', node_id: 'query', ts: tt + 3.05, data: { node_type: 'agent', label: '查询订单' } },
|
||
{ seq: 11, type: 'node.finished', node_id: 'query', ts: tt + 3.15, data: { duration_ms: 100, preview: '共 42 单' } },
|
||
{ seq: 12, type: 'run.finished', node_id: null, ts: tt + 3.2, data: {
|
||
output: { answer: '共 42 单' }, usage: { input_tokens: 900, output_tokens: 400, cost_usd: 0.002 },
|
||
timing: { wall_ms: 3200, active_ms: 3200, wait_ms: 0 } } },
|
||
] }))
|
||
fakes.set(`GET /api/runs/${REEXEC}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${REEXEC}/artifacts`, () => ({ status: 200, json: [] }))
|
||
await page.goto(`${WEB}/runs/${REEXEC}?view=trace&at=1200`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
await page.locator('[data-trace-now] [data-now-node=query]').click({ timeout: 5000 }).catch(() => {})
|
||
await page.waitForTimeout(150)
|
||
const warnsOf = async () => (await page.locator('[data-trace-node=query] [data-node-warn]').allInnerTexts().catch(() => [])).join(' | ')
|
||
const firstExec = await warnsOf()
|
||
check('回放到第一次执行：说它被提醒后重答了，看不到第二次才有的收尾轮那件事',
|
||
firstExec.includes('提醒之后重答了') && !firstExec.includes('收尾轮'), firstExec || '（没有提醒）')
|
||
await page.goto(`${WEB}/runs/${REEXEC}?view=trace&at=2700`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
await page.locator('[data-trace-now] [data-now-node=query]').click({ timeout: 5000 }).catch(() => {})
|
||
await page.waitForTimeout(150)
|
||
const secondExec = await warnsOf()
|
||
check('回放到第二次执行：说收尾轮还想调工具、交出来的可能不完整，不说「重答」',
|
||
secondExec.includes('收尾轮仍想调用工具') && !secondExec.includes('重答'), secondExec || '（没有提醒）')
|
||
await page.locator('[data-run-trace] [role=slider]').focus().catch(() => {})
|
||
await page.keyboard.press('End')
|
||
await page.waitForTimeout(150)
|
||
check('回到终态（第三次执行，干干净净）：不挂前两次的提醒',
|
||
await mode() === '终态' && await page.locator('[data-trace-node=query]').count() === 1 && !(await warnsOf()),
|
||
`${await mode()} ${await warnsOf() || '（没有提醒）'}`)
|
||
// 关键时刻和节点卡同一个说法：两次执行各一个时刻，各用各的措辞。以前只取整次运行最后一次，
|
||
// 第一次那下从列表里消失，收尾轮那下又被写成「把工具调用写成了文字」（3C REQ-23）
|
||
const reMoments = await page.locator('[data-trace-moments] [data-moment*=":markup"]').evaluateAll((els) =>
|
||
els.map((e) => ({ key: e.getAttribute('data-moment'), text: (e.textContent ?? '').replace(/\s+/g, ' ') })))
|
||
const nudgeM = reMoments.find((m) => m.key === 'query:markup0')
|
||
const settleM = reMoments.find((m) => m.key === 'query:markup')
|
||
check('两次执行各有一个时刻：前一次带序号，最后一次沿用 query:markup', reMoments.length === 2 && !!nudgeM && !!settleM,
|
||
reMoments.map((m) => m.key).join(', '))
|
||
check('第一次写「把工具调用写成了文字、提醒之后重答了」，第二次写「收尾轮仍想调用工具」',
|
||
!!nudgeM?.text.includes('把工具调用写成了文字') && !!nudgeM?.text.includes('重答') && !nudgeM?.text.includes('收尾轮')
|
||
&& !!settleM?.text.includes('收尾轮仍想调用工具') && !settleM?.text.includes('写成了文字'),
|
||
reMoments.map((m) => m.text).join(' | '))
|
||
})
|
||
|
||
// 失败在「汇总」上，而工作流之后把「汇总」删了：画布上对准它什么也对不到
|
||
await section('失败的节点在工作流现在的图里已经没了', async () => {
|
||
const GONE = 'fake0gonefail00000000000000000'
|
||
const GONE_ERROR = '节点「汇总」失败：模型服务出错了（HTTP 500）'
|
||
fakes.set(`GET /api/runs/${GONE}`, () => ({ status: 200, json: {
|
||
...traceRun(GONE), status: 'failed', output: null, error: GONE_ERROR, error_node_id: 'sum', finished_at: iso(tt + 6.2 + WAIT_S),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${GONE}/events`, () => ({ status: 200, json: [
|
||
...traceEvents().slice(0, 15),
|
||
{ seq: 16, type: 'node.failed', node_id: 'sum', ts: tt + 6.0 + WAIT_S, data: { error: GONE_ERROR, duration_ms: 2400 } },
|
||
{ seq: 17, type: 'run.failed', node_id: null, ts: tt + 6.1 + WAIT_S, data: {
|
||
error: GONE_ERROR, node_id: 'sum', timing: { wall_ms: (6.1 + WAIT_S) * 1000, active_ms: 6100, wait_ms: WAIT_S * 1000 } } },
|
||
] }))
|
||
fakes.set(`GET /api/runs/${GONE}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${GONE}/artifacts`, () => ({ status: 200, json: [] }))
|
||
await page.goto(`${WEB}/runs/${GONE}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=failed]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('横幅不给落空的「在画布中定位」，改给「在航迹中看」',
|
||
await page.locator('[data-run-banner=failed] [data-action=locate]').count() === 0
|
||
&& await page.locator('[data-run-banner=failed] [data-action=locate-trace]').count() === 1)
|
||
const goneHead = page.locator('[data-run-detail] > header [data-action=open-canvas]')
|
||
check('详情头照样能在画布中回放，只是不带对不上的 focus',
|
||
await goneHead.getAttribute('href').catch(() => null) === `/studio/${wfHost.id}?run=${GONE}`
|
||
&& !/对准/.test(await goneHead.getAttribute('title').catch(() => '') ?? ''),
|
||
await goneHead.getAttribute('href').catch(() => '没有这个按钮') ?? '')
|
||
await page.locator('[data-run-banner=failed] [data-action=locate-trace]').click().catch(() => {})
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('「在航迹中看」：切到航迹，选中失败的那个节点，停在终态',
|
||
await viewTab('trace').getAttribute('aria-selected').catch(() => null) === 'true'
|
||
&& await page.locator('[data-trace-node=sum]').count() === 1 && await mode() === '终态')
|
||
check('那张节点卡也说清画布上已经没有它', await page.locator('[data-trace-node=sum] [data-node-gone]').count() === 1)
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 工件
|
||
|
||
await section('工件：按节点分组，就地打开', async () => {
|
||
await page.goto(`${WEB}/runs/${TRACE}?view=artifacts`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-artifacts]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const groups = await page.locator('[data-run-artifacts] [data-artifact-group]').evaluateAll((els) => els.map((e) => e.getAttribute('data-artifact-group')))
|
||
check('按节点分组，按执行顺序', groups.join(',') === 'query,sum', groups.join(',') || '没有分组')
|
||
const qText = await page.locator(`[data-artifact-id="${ART_Q}"]`).innerText().catch(() => '')
|
||
check('每件写着类型和大小', qText.includes('查询快照') && qText.includes('2.0 KB'), qText.replace(/\s+/g, ' '))
|
||
await page.locator(`[data-artifact-id="${ART_Q}"] [data-action=artifact-open]`).click().catch(() => {})
|
||
const artDialog = page.getByRole('dialog')
|
||
// 弹窗先出来、内容取回来之后才画表：等到解开的那一块再读
|
||
await artDialog.locator('[data-artifact]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const artText = await artDialog.innerText().catch(() => '')
|
||
check('用证据查看器打开：带节点名，解开 SQL 和结果表',
|
||
artText.includes('查询订单') && artText.includes('select count(*)') && artText.includes('42'), artText.replace(/\s+/g, ' ').slice(0, 90))
|
||
await page.keyboard.press('Escape')
|
||
await page.locator(`[data-artifact-id="${ART_Q}"] [data-action=artifact-moment]`).click().catch(() => {})
|
||
await page.waitForTimeout(400)
|
||
check('「在航迹里看这一刻」跳到航迹、定位到它产出的时刻',
|
||
await viewTab('trace').getAttribute('aria-selected').catch(() => null) === 'true' && (await readout('at')).includes('00:02.5'),
|
||
await readout('at'))
|
||
const realWithArt = []
|
||
for (const r of allRuns.slice(0, 40)) {
|
||
const a = await getJson(`/runs/${r.id}/artifacts`)
|
||
if (a.length) { realWithArt.push([r, a]); break }
|
||
}
|
||
if (realWithArt.length) {
|
||
const [r, a] = realWithArt[0]
|
||
await page.goto(`${WEB}/runs/${r.id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
await page.waitForTimeout(300)
|
||
check('真实运行：工件页签的数和接口一致', (await viewTab('artifacts').innerText().catch(() => '')).includes(String(a.length)),
|
||
`接口 ${a.length} 件`)
|
||
}
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 回画布
|
||
|
||
await section('在画布中回放', async () => {
|
||
await page.goto(`${WEB}/runs/${TRACE}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail]').waitFor()
|
||
const replayLink = page.locator('[data-run-detail] > header [data-action=open-canvas]')
|
||
check('跑完的运行，详情头是「在画布中回放」',
|
||
(await replayLink.innerText().catch(() => '')).includes('在画布中回放')
|
||
&& await replayLink.getAttribute('href').catch(() => null) === `/studio/${wfHost.id}?run=${TRACE}`,
|
||
await replayLink.getAttribute('href').catch(() => '') ?? '')
|
||
check('工作流之后改过结构：链接说明画布上是现在的图',
|
||
await replayLink.getAttribute('data-graph-drift').catch(() => null) === '1'
|
||
&& /改过/.test(await replayLink.getAttribute('title').catch(() => '') ?? ''))
|
||
fakes.delete('GET /api/workflows')
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 列表：缩略条、取消原因
|
||
|
||
await section('列表：每行一条缩略条', async () => {
|
||
const FAILED_ROW = 'fake0failedrow0000000000000000'
|
||
const CANCEL_ROW = 'fake0cancelrow0000000000000000'
|
||
const failedRow = { ...traceRun(FAILED_ROW), status: 'failed', error: '节点「汇总」失败：模型服务出错了（HTTP 500）', error_node_id: 'sum',
|
||
usage: { wall_ms: 4000, active_ms: 4000, wait_ms: 0, duration_ms: 4000 }, finished_at: iso(tt + 4) }
|
||
const cancelRow = { ...traceRun(CANCEL_ROW), status: 'cancelled', error: '用户取消：在等审批时放弃了这次运行',
|
||
usage: { wall_ms: 90000, active_ms: 3000, wait_ms: 87000, duration_ms: 3000 }, finished_at: iso(tt + 90) }
|
||
fakes.set('GET /api/runs', () => ({ status: 200, json: [traceRun(TRACE), failedRow, cancelRow, ...listTop] }))
|
||
await page.goto(`${WEB}/runs`, { waitUntil: 'networkidle' })
|
||
await rowsOf().first().waitFor()
|
||
const shapeCount = await page.locator('[data-runs-list] [data-run-id] [data-run-shape]').count()
|
||
check('每一行都有一条缩略条', shapeCount === await rowsOf().count() && shapeCount > 0, `${shapeCount} 条`)
|
||
const waitFrac = await page.locator(`[data-run-id="${TRACE}"] [data-shape-seg=wait]`).evaluate(
|
||
(el) => el.getBoundingClientRect().width / el.parentElement.getBoundingClientRect().width).catch(() => 0)
|
||
check('等人占了九成八的墙钟，缩略条上等人那段也占大半', waitFrac > 0.9, waitFrac.toFixed(2))
|
||
check('失败的那一行收在失败色上', await page.locator(`[data-run-id="${FAILED_ROW}"] [data-shape-end=failed]`).count() === 1)
|
||
check('缩略条的 title 写着执行和等人',
|
||
/执行 .+ · 等人 .+/.test(await page.locator(`[data-run-id="${TRACE}"] [data-run-shape]`).getAttribute('title').catch(() => '') ?? ''))
|
||
const cancelText = (await page.locator(`[data-run-id="${CANCEL_ROW}"]`).innerText().catch(() => '')).replace(/\s+/g, ' ')
|
||
const cancelWhy = cancelText.includes('在等审批时放弃了这次运行')
|
||
const cancelDup = cancelText.includes('用户取消')
|
||
// 这一行的工作流名借的是沙箱里的真实工作流，只报两项判断
|
||
check('已取消写原因，不重复「用户取消」', cancelWhy && !cancelDup, `原因 ${cancelWhy ? '在' : '缺'} · 「用户取消」${cancelDup ? '重复了' : '没重复'}`)
|
||
fakes.delete('GET /api/runs')
|
||
})
|
||
|
||
await section('工作流筛选：未保存的工作流', async () => {
|
||
await page.goto(`${WEB}/runs`, { waitUntil: 'networkidle' })
|
||
await rowsOf().first().waitFor()
|
||
const wfOptions = await page.locator('[data-runs-workflow] option').evaluateAll((els) => els.map((e) => e.value))
|
||
check('工作流下拉里有「未保存的工作流」', wfOptions.includes('__none__'))
|
||
if (wfOptions.includes('__none__')) {
|
||
await listAfter(() => page.locator('[data-runs-workflow]').selectOption('__none__'), (p) => p.get('workflow_id') === '__none__')
|
||
check('地址记下 ?wf=__none__', new URL(page.url()).searchParams.get('wf') === '__none__')
|
||
const names = await page.locator('[data-runs-list] [data-run-id] > div:first-of-type').evaluateAll((els) => els.map((e) => e.textContent ?? ''))
|
||
check('筛出来的都是未保存的工作流', names.length > 0 && names.every((n) => n.includes('未保存的工作流')), `${names.length} 行`)
|
||
await page.locator('[data-runs-workflow]').selectOption('')
|
||
await settle()
|
||
}
|
||
|
||
// ------------------------------------------------------------------ 放弃
|
||
|
||
if (pending.length) {
|
||
console.log('\n=== 等审批的运行就地放弃 ===')
|
||
const target = pending[0]
|
||
const full = await getJson(`/runs/${target.run_id}`)
|
||
const evs = await getJson(`/runs/${target.run_id}/events`)
|
||
await page.goto(`${WEB}/runs/${target.run_id}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-detail][data-run-code=waiting]').waitFor({ timeout: 8000 }).catch(() => {})
|
||
const abandon = page.locator('[data-run-banner=waiting] [data-action=abandon]')
|
||
check('等审批的横幅上有「放弃这次运行」', await abandon.count() === 1)
|
||
if (await abandon.count()) {
|
||
let cancelCalls = 0
|
||
fakes.set(`POST /api/runs/${target.run_id}/cancel`, () => { cancelCalls++; return { status: 200, json: { ok: true, status: 'cancelled' } } })
|
||
await abandon.click()
|
||
const ask = page.getByRole('dialog')
|
||
await ask.waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('放弃前要确认，并写清待审批一并关闭', (await ask.innerText().catch(() => '')).includes('待审批'))
|
||
const tc = Date.now() / 1000
|
||
fakes.set(`GET /api/runs/${target.run_id}`, () => ({ status: 200, json: {
|
||
...full, status: 'cancelled', error: '用户取消：在等审批时放弃了这次运行', finished_at: iso(tc),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${target.run_id}/events`, () => ({ status: 200, json: [...evs, {
|
||
seq: (evs.at(-1)?.seq ?? 0) + 1, type: 'run.cancelled', node_id: null, ts: tc,
|
||
data: { actor: '张工', message: '放弃了这次运行，1 条待审批一并关闭', timing: { wall_ms: 1000, active_ms: 10, wait_ms: 990 } },
|
||
}] }))
|
||
fakes.set('GET /api/approvals', (url) => ({
|
||
status: 200, json: pending.filter((a) => a.id !== target.id && (!url.searchParams.get('run_id') || a.run_id === url.searchParams.get('run_id'))),
|
||
}))
|
||
await ask.getByRole('button', { name: '放弃这次运行' }).click({ timeout: 5000 }).catch(() => {})
|
||
const gone = await page.waitForFunction(
|
||
() => document.querySelector('[data-run-detail]')?.getAttribute('data-run-code') === 'cancelled',
|
||
null, { timeout: 6000 },
|
||
).then(() => true, () => false)
|
||
check('发的是 POST /cancel', cancelCalls === 1)
|
||
check('状态变成已取消', gone)
|
||
const status = (await page.locator('[data-run-telemetry]').innerText().catch(() => '')).replace(/\s+/g, ' ')
|
||
check('状态格写着谁放弃的', status.includes('张工') && status.includes('放弃'), status.slice(0, 60))
|
||
fakes.delete(`POST /api/runs/${target.run_id}/cancel`)
|
||
fakes.delete(`GET /api/runs/${target.run_id}`)
|
||
fakes.delete(`GET /api/runs/${target.run_id}/events`)
|
||
fakes.delete('GET /api/approvals')
|
||
}
|
||
}
|
||
})
|
||
|
||
// ------------------------------------------------------------------ 等了几天、窄屏
|
||
|
||
// 停在审批上十天多：等人要写「10 天 05 小时」，而不是被截成「245 小时 3…」；游标写「T+10 天 05:30:07」，
|
||
// 不写「T+245:30:07.3」（同一行的墙钟、等人写的是「10 天」，而且放不下）。等人的时长在涨，游标要走
|
||
const STALE = 'fake0stalewait0000000000000000'
|
||
const fits = (sel) => page.locator(sel).evaluateAll((els) => els.length > 0 && els.every((e) => e.scrollWidth <= e.clientWidth + 0.5))
|
||
let tw, longApproval
|
||
await section('等了几天的审批、1024 宽', async () => {
|
||
tw = Date.now() / 1000 - 10 * 86400 - 5.5 * 3600
|
||
longApproval = {
|
||
id: 'fake0longappr0000000000000000', run_id: STALE, node_id: 'gate', mode: 'approve', title: '放行吗？',
|
||
payload: { kind: 'human_node', node_id: 'gate', mode: 'approve', title: '放行吗？', message: '', schema: {}, context: {} },
|
||
status: 'pending', response: {}, created_at: iso(tw + 3.3), resolved_by: null, resolved_at: null,
|
||
workflow_id: wfHost.id, workflow_name: '订单日报', node_label: '人工审批', run_status: 'interrupted', run_class: 'exploratory',
|
||
}
|
||
fakes.set(`GET /api/runs/${STALE}`, () => ({ status: 200, json: {
|
||
...traceRun(STALE), status: 'interrupted', output: null, finished_at: null, created_at: iso(tw), started_at: iso(tw),
|
||
usage: { input_tokens: 1200, output_tokens: 300, cost_usd: 0.004 },
|
||
} }))
|
||
fakes.set(`GET /api/runs/${STALE}/events`, () => ({ status: 200, json: traceEvents().slice(0, 11).map((e) => ({ ...e, ts: e.ts - tt + tw })) }))
|
||
fakes.set(`GET /api/runs/${STALE}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${STALE}/artifacts`, () => ({ status: 200, json: [] }))
|
||
fakes.set('GET /api/approvals', (url) => ({
|
||
status: 200, json: !url.searchParams.get('run_id') || url.searchParams.get('run_id') === STALE ? [longApproval] : [],
|
||
}))
|
||
const DAY_AT = /^T\+10 天 05:3\d:\d\d$/
|
||
// 1300 宽：详情区 836px，排成一行的话一格只剩 78px，「10 天 05 小时」放不下，得排两行
|
||
for (const [w, h] of [[1440, 900], [1300, 860], [1024, 768]]) {
|
||
await page.setViewportSize({ width: w, height: h })
|
||
await page.goto(`${WEB}/runs/${STALE}?view=trace`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const waitRead = await readout('wait')
|
||
check(`${w} 宽：等人写成跨天的跨度（10 天 05 小时），不被截断`,
|
||
waitRead.startsWith('10 天 05 小时') && await fits('[data-trace-readout] [data-readout=wait]'), waitRead)
|
||
const atRead = (await readout('at')).trim()
|
||
check(`${w} 宽：游标写成跨天的时刻（T+10 天 05:30:xx），不被截断`,
|
||
DAY_AT.test(atRead) && await fits('[data-trace-readout] [data-readout=at]'), atRead)
|
||
}
|
||
await page.setViewportSize({ width: 1440, height: 900 })
|
||
await page.goto(`${WEB}/runs/${STALE}?view=trace`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-readout]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
check('「此刻」的等审批也写跨天', (await page.locator('[data-trace-now] [data-now-node=gate]').innerText().catch(() => '')).includes('10 天 05 小时'))
|
||
const waitAtA = await readout('at')
|
||
// 跨天的时刻只写到秒：隔一秒多再读
|
||
await page.waitForTimeout(1100)
|
||
const waitAtB = await readout('at')
|
||
check('停在审批上时游标照样跟着现在走（和坞里同一拍）', await mode() === '实时' && waitAtA !== waitAtB, `${waitAtA} → ${waitAtB}`.replace(/\s+/g, ' '))
|
||
})
|
||
|
||
// 去审批卡：审批卡在时间线里。从航迹、工件、原始事件点过来，要切回时间线、描一下卡片，
|
||
// 并且焦点进到卡片里——键盘和读屏用户才接得着。视图经地址切，提交比点击晚好几帧
|
||
await section('去审批卡：从哪个视图点都能把焦点送进卡片', async () => {
|
||
for (const [from, label] of [['trace', '航迹'], ['artifacts', '工件'], ['raw', '原始事件'], ['stream', '时间线']]) {
|
||
await page.goto(`${WEB}/runs/${STALE}${from === 'trace' || from === 'artifacts' ? `?view=${from}` : ''}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-banner=waiting] [data-action=jump-approval]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
if (from === 'raw') {
|
||
await page.locator('[data-action=raw]').click().catch(() => {})
|
||
await page.locator('[data-raw-events]').waitFor({ timeout: 3000 }).catch(() => {})
|
||
}
|
||
await page.locator('[data-run-banner=waiting] [data-action=jump-approval]').click().catch(() => {})
|
||
const into = await page.waitForFunction(() => !!document.activeElement?.closest('[data-approval-card]'), null, { timeout: 3000 })
|
||
.then(() => true, () => false)
|
||
const ringed = await page.locator(`[data-approval-card="${longApproval.id}"].runs-focus-ring`).count()
|
||
const back = await viewTab('stream').getAttribute('aria-selected').catch(() => null) === 'true'
|
||
check(`从「${label}」点「去审批卡」：回到时间线，焦点进了审批卡，卡片描了一下边`, into && ringed === 1 && back,
|
||
`时间线 ${back ? '是' : '否'} · 描边 ${ringed} · 焦点在 ${await page.evaluate(() => {
|
||
const a = document.activeElement
|
||
return `${a?.tagName}${a?.getAttribute('data-action') ? `[${a.getAttribute('data-action')}]` : ''}`
|
||
})}`)
|
||
}
|
||
})
|
||
|
||
// 批过的十天等待：「审批已处理」「运行完成」都在 T+10 天之后。关键时刻里时刻那一栏按最宽的
|
||
// 一条排齐，不压到后面的徽标上；终态的游标放得下
|
||
await section('跨天的关键时刻', async () => {
|
||
const LONGDONE = 'fake0longdone00000000000000000'
|
||
const td = Date.now() / 1000 - 11 * 86400
|
||
const LONG_S = 10 * 86400
|
||
const longTiming = { wall_ms: (6.2 + LONG_S) * 1000, active_ms: 6200, wait_ms: LONG_S * 1000 }
|
||
fakes.set(`GET /api/runs/${LONGDONE}`, () => ({ status: 200, json: {
|
||
...traceRun(LONGDONE), created_at: iso(td), started_at: iso(td), finished_at: iso(td + 6.2 + LONG_S),
|
||
usage: { input_tokens: 2000, output_tokens: 800, cost_usd: 0.007, duration_ms: 6200, ...longTiming },
|
||
} }))
|
||
fakes.set(`GET /api/runs/${LONGDONE}/events`, () => ({ status: 200, json: traceEvents().map((e) => ({
|
||
...e,
|
||
ts: e.ts - tt + td + (e.seq >= 12 ? LONG_S - WAIT_S : 0),
|
||
...(e.type === 'run.finished' ? { data: { ...e.data, timing: longTiming } } : {}),
|
||
})) }))
|
||
fakes.set(`GET /api/runs/${LONGDONE}/graph`, () => ({ status: 200, json: { graph: traceGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${LONGDONE}/artifacts`, () => ({ status: 200, json: [] }))
|
||
const momentsAligned = () => page.locator('[data-trace-moments] [data-moment]').evaluateAll((els) => {
|
||
const cols = els.map((b) => {
|
||
const at = b.querySelector('[data-moment-at]')
|
||
return { at: at.getBoundingClientRect(), fit: at.scrollWidth <= at.clientWidth + 0.5, mark: at.nextElementSibling.getBoundingClientRect().left }
|
||
})
|
||
return cols.length > 0 && cols.every((c) => c.fit && c.at.right <= c.mark + 0.5 && Math.abs(c.mark - cols[0].mark) < 0.5)
|
||
})
|
||
for (const [w, h] of [[1440, 900], [1024, 768]]) {
|
||
await page.setViewportSize({ width: w, height: h })
|
||
await page.goto(`${WEB}/runs/${LONGDONE}?view=trace`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-moments]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const texts = (await page.locator('[data-trace-moments] [data-moment]').allInnerTexts().catch(() => [])).map((t) => t.replace(/\s+/g, ' '))
|
||
check(`${w} 宽：跨天的关键时刻写「T+10 天 00:00:03」，时刻一栏排齐、不压到徽标上`,
|
||
texts.some((t) => t.includes('T+10 天 00:00:03') && t.includes('审批已处理') && t.includes('等了 10 天')) && await momentsAligned(),
|
||
texts.join(' | '))
|
||
check(`${w} 宽：终态的游标写「T+10 天 00:00:06」，放得下`,
|
||
(await readout('at')).trim() === 'T+10 天 00:00:06' && await fits('[data-trace-readout] [data-readout=at]'), await readout('at'))
|
||
}
|
||
})
|
||
|
||
// 屏幕矮、节点多：九个节点的失败运行，横幅占去一截。读数区先拿够它要的，默认选中的失败
|
||
// 节点卡、关键时刻都得在首屏；坞拿剩下的，不矮过能拖到的最矮，泳道在坞里滚
|
||
await section('屏幕矮、节点多：读数区不被航迹坞压住', async () => {
|
||
const FAN = 'fake0fanfail000000000000000000'
|
||
const FAN_ERROR = '节点「查询订单」失败：模型服务出错了（HTTP 500）'
|
||
const FAN_STEPS = ['check', 'score', 'route', 'publish', 'archive']
|
||
const fanGraph = {
|
||
nodes: [...traceGraph.nodes, ...FAN_STEPS.map((id, i) => ({
|
||
id, type: 'llm', position: { x: 800 + i * 200, y: 0 }, data: { label: `步骤 ${i + 1}`, config: {} },
|
||
}))],
|
||
edges: [...traceGraph.edges, ...FAN_STEPS.map((id, i) => ({ source: i ? FAN_STEPS[i - 1] : 'sum', target: id }))],
|
||
}
|
||
fakes.set(`GET /api/runs/${FAN}`, () => ({ status: 200, json: {
|
||
...traceRun(FAN), status: 'failed', output: null, error: FAN_ERROR, error_node_id: 'query',
|
||
usage: { input_tokens: 0, output_tokens: 0, cost_usd: 0, duration_ms: 1200, wall_ms: 1200, active_ms: 1200, wait_ms: 0 },
|
||
finished_at: iso(tt + 1.2),
|
||
} }))
|
||
fakes.set(`GET /api/runs/${FAN}/events`, () => ({ status: 200, json: [
|
||
...traceEvents().slice(0, 4),
|
||
{ seq: 5, type: 'node.failed', node_id: 'query', ts: tt + 1.1, data: { error: FAN_ERROR, duration_ms: 800 } },
|
||
{ seq: 6, type: 'run.failed', node_id: null, ts: tt + 1.2, data: {
|
||
error: FAN_ERROR, node_id: 'query', timing: { wall_ms: 1200, active_ms: 1200, wait_ms: 0 } } },
|
||
] }))
|
||
fakes.set(`GET /api/runs/${FAN}/graph`, () => ({ status: 200, json: { graph: fanGraph, workflow_id: wfHost.id, version: null } }))
|
||
fakes.set(`GET /api/runs/${FAN}/artifacts`, () => ({ status: 200, json: [] }))
|
||
const firstScreen = () => page.evaluate(() => {
|
||
const read = document.querySelector('[data-trace-readout]')?.getBoundingClientRect()
|
||
const whole = (sel) => {
|
||
const b = document.querySelector(sel)?.getBoundingClientRect()
|
||
return !!b && !!read && b.top >= read.top - 0.5 && b.bottom <= read.bottom + 1
|
||
}
|
||
return {
|
||
card: whole('[data-trace-node=query]'), moments: whole('[data-trace-moments]'),
|
||
dock: Math.round(document.querySelector('[data-run-trace] section[aria-label="航迹"]')?.getBoundingClientRect().height ?? 0),
|
||
}
|
||
})
|
||
// 屏幕够高：坞按 RunTimeline.dockHeightFor 给，泳道一行不裁、不用滚，也不多留一截空白
|
||
// （以前这里自己抄了一份排版常量，再加 10px 余量糊住少算的上边框，3C REQ-8 / REQ-13）
|
||
await page.setViewportSize({ width: 1440, height: 1500 })
|
||
await page.goto(`${WEB}/runs/${FAN}?view=trace`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-trace] .tl-lane').first().waitFor({ timeout: 5000 }).catch(() => {})
|
||
await page.waitForTimeout(200)
|
||
const tallDock = await page.evaluate(() => {
|
||
const sc = document.querySelector('[data-run-trace] .tl-scroll')
|
||
const lanes = [...document.querySelectorAll('[data-run-trace] .tl-lane')]
|
||
const last = lanes.at(-1)?.getBoundingClientRect()
|
||
const b = sc?.getBoundingClientRect()
|
||
return { lanes: lanes.length, over: sc ? sc.scrollHeight - sc.clientHeight : null,
|
||
slack: last && b ? Math.round(b.bottom - last.bottom) : null }
|
||
})
|
||
check('屏幕够高：坞正好装下每一条泳道，不滚、不多留空白', tallDock.lanes >= 9 && tallDock.over === 0
|
||
&& tallDock.slack != null && tallDock.slack >= 0 && tallDock.slack <= 1, JSON.stringify(tallDock))
|
||
for (const [w, h] of [[1440, 900], [1180, 800], [1024, 768]]) {
|
||
await page.setViewportSize({ width: w, height: h })
|
||
await page.goto(`${WEB}/runs/${FAN}?view=trace`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-trace-node=query]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
await page.waitForTimeout(150)
|
||
const seen = await firstScreen()
|
||
check(`${w}×${h}：失败节点卡、关键时刻整块都在首屏，坞不矮过 132px`, seen.card && seen.moments && seen.dock >= 132, JSON.stringify(seen))
|
||
}
|
||
// 再矮（或者横幅更高）就放不下了：坞不再让，读数区底边淡出，看得出下面还有
|
||
await page.setViewportSize({ width: 1024, height: 640 })
|
||
await page.waitForTimeout(300)
|
||
check('1024×640：读数区放不下时底边淡出，提示能往下滚', await page.locator('[data-trace-readout][data-more]').count() === 1)
|
||
|
||
// 1024 宽：详情区只有 600px，读数一格不到 70px 的字宽
|
||
await page.setViewportSize({ width: 1024, height: 768 })
|
||
fakes.set('GET /api/runs', () => ({ status: 200, json: [traceRun(TRACE), ...listTop] }))
|
||
await page.goto(`${WEB}/runs/${TRACE}`, { waitUntil: 'networkidle' })
|
||
await page.locator('[data-run-telemetry]').waitFor({ timeout: 5000 }).catch(() => {})
|
||
const cut = await page.locator('[data-run-telemetry] [data-telemetry]').evaluateAll((els) =>
|
||
els.filter((e) => e.scrollWidth > e.clientWidth + 0.5).map((e) => `${e.getAttribute('data-telemetry')}「${e.textContent}」`))
|
||
check('1024 宽：详情头的读数没有一格被截成省略号', cut.length === 0, cut.join('、') || '全部放得下')
|
||
const footH = await page.locator(`[data-runs-list] [data-run-id="${TRACE}"] [data-run-duration]`).evaluate(
|
||
(el) => el.parentElement.getBoundingClientRect().height).catch(() => 99)
|
||
check('1024 宽：列表行底下那一行不折行（时长太长就截断，用量不被拆开）', footH <= 18, `${footH}px`)
|
||
await page.setViewportSize({ width: 1440, height: 900 })
|
||
fakes.delete('GET /api/runs')
|
||
fakes.delete('GET /api/approvals')
|
||
})
|
||
|
||
await section('收尾', async () => {
|
||
// 提取模板之后会跳进画布：画布一打开就拿图去做校验、变量分析，这两个是带图的只读 POST
|
||
// （同样被探针拦下，不落库）。赶上它们发出来之前就离开了画布的话就没有
|
||
check('只有伪造过的写请求', writes.every((w) => /\/continue$|\/cancel$|\/copilot\/from-run$|DELETE \/api\/runs\/fake0|^POST \/api\/runs$|^POST \/api\/workflows\/(validate|variables)$/.test(w)),
|
||
writes.join(', '))
|
||
check('没有未捕获的运行时错误', errors.length === 0, errors[0] ?? '')
|
||
})
|
||
|
||
await browser.close()
|
||
console.log(failed ? `\n${failed} 项没过` : '\n全部通过')
|
||
process.exit(failed ? 1 : 0)
|